GE FCM16DJWW Use and Care Manual - Page 9

Preparing to install the freezer., Normal operating characteristics.

Get GE FCM16DJWW PDF manuals and user guides View all GE FCM16DJWW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Preparing to install the freezer. GEAppliances.com Read these instructions completely and carefully. )UHH]HU/RFDWLRQ Your freezer should be conveniently located for day-to-day use in a dry, well-ventilated room. Do not install the freezer where the temperature will go below 32°F (0°C) or above 110°F (43°C), because it will not maintain proper temperatures. Be sure to install your freezer on a floor strong enough to support it when it is fully loaded. Level Freezer Level the freezer from side to side and front to back so that the lid will seal properly. Use shims to level the freezer if necessary. NOTE: It should not be necessary to remove the lid during installation. If, for some reason, the hinges need adjustment, call a professional service company. &OHDUDQFHVDQG9HQWLODWLRQ Allow at least 3" (76 mm) clearance on both sides of the freezer and 3" (76 mm) between the back of the freezer and the wall. Leave room above the freezer to open the lid. Keep flammable materials and vapors, such as gasoline, away from freezer. Do not cover the freezer with items such as blankets, sheets, tablecloths, etc. This reduces air circulation. Normal operating characteristics. 7KHVHWKLQJVDUHQRUPDODQG GRQRWLQGLFDWHDQHHGIRUVHUYLFH „ A warm cabinet exterior as the refrigeration system transfers heat from the inside to the outside through the exterior cabinet walls. „ The sound of the high-efficiency compressor motor. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
9
Preparing to install the freezer.
GEAppliances.com
Read these instructions completely and carefully.
Your freezer should be conveniently located for
day-to-day use in a dry, well-ventilated room.
Do not install the freezer where the temperature will go
below 32°F (0°C) or above 110°F (43°C), because it will
not maintain proper temperatures.
Be sure to install your freezer on a floor strong enough
to support it when it is fully loaded.
Allow at least 3” (76 mm) clearance on both sides of
the freezer and 3” (76 mm) between the back of the
freezer and the wall. Leave room above the freezer to
open the lid.
Keep flammable materials and vapors, such as
gasoline, away from freezer.
Do not cover the freezer with items such as blankets,
sheets, tablecloths, etc. This reduces air circulation.
Level Freezer
Level the freezer from side to side and front to back
so that the lid will seal properly. Use shims to level the
freezer if necessary.
NOTE:
It should not be necessary to remove the lid
during installation. If, for some reason, the hinges need
adjustment, call a professional service company.
Normal operating characteristics.
A warm cabinet exterior as the refrigeration system transfers heat from the inside to the outside through the exterior
cabinet walls.
The sound of the high-efficiency compressor motor.