GE FUF14DHRWW Use and Care Manual - Page 6

Electronic Temperature Control

Page 6 highlights

About the operation of your freezer. Decrease Pad Increase Pad High Temp Light Door Ajar Light Turbo Freeze Light Lock Controls Light Power Off Light Temp Indicator for °F or °C Power Fail Indicator Light Turbo Freeze LQGLFDWRUVQRZÀDNH Control Lock Indicator $ODUP2Ⱥ Indicator Light Options Pad Exit Light Set Pad Press & Hold Light Electronic Temperature Control This electronic temperature control is located on the front of the freezer door. The temperature is factory-preset to provide satisfactory food storage temperatures. To adjust the temperature setting, press - + to decrease temperatures and to increase temperatures. Allow several hours for the temperature to stabilize between adjustments. Temp Alarm This electronic control has a temperature alarm feature. An alarm will sound if the freezer temperature reaches unsafe levels. To silence the alarm, push Set or any key on the control panel. Turbo Freeze To enable Turbo Freeze, press Options until the indicator for "Turbo Freeze" is highlighted and then press Set. The unit will be in "Turbo Freeze" mode for 72 hours and the snow flake will be highlighted. After the 72 hours is completed, "Turbo Freeze" turns off automatically. The snowflake will turn off to show that "Turbo Freeze" is off. To exit "Turbo Freeze" before the 72 hour automatic shutoff, press Options until the indicator for "Turbo Freeze" is highlighted and press Set. The snowflake will go off showing that "Turbo Freeze" is not active. Control Lock To lock the controls, press Options until the display reads "Lock Controls" and then press Set. The locked indicator light will be displayed. To unlock, press and hold Set for 3 seconds. The indicator light will go off and the control panel will be unlocked. Power Off To turn the freezer off, press Options the display reads "Power Off". Press and hold Set for 3 seconds. When the freezer is off, the only words illuminated will be "Power Off" and "Press & Hold" (referring to the Set pad). To power back on, press and hold Set for 3 seconds. The unit will then be in standby mode. Power Fail If your unit has lost power, the control panel will display "Power Fail" and the number of hours that your unit has been without power up to a maximum of 50 hrs once the power has been restored. The alarm will sound until the condition is acknowledged by pressing Set or any other button on the control panel. Door Ajar If your door has been left open for more than 5 minutes, the control panel will display "Door Ajar" and will sound an alarm until the door has been closed or any button is pressed on the control panel. If a button on the control panel has been pressed but the door has not been closed, "Door Ajar" will continue to be displayed on the control panel until the door has been closed. High Temp Light The high temperature light will illuminate until the freezer reaches 23° F (-5° C) (safe zone) and the cabinet reaches the set temperature. C or F Setting - + To change between C° or F°, press and hold the and pads at the same time for 5 seconds. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

About the operation of your freezer.
6
This electronic temperature control is located on the front of the
freezer door. The temperature is factory-preset to provide satisfactory
food storage temperatures. To adjust the temperature setting, press
-
to decrease temperatures and
+
to increase temperatures. Allow
several hours for the temperature to stabilize between adjustments.
Temp Alarm
This electronic control has a temperature alarm feature. An
alarm will sound if the freezer temperature reaches unsafe
levels. To silence the alarm, push
Set
or any key on the control
panel.
Turbo Freeze
To enable
Turbo Freeze
, press
Options
until the indicator for
Turbo Freeze”
is highlighted and then press
Set
. The unit will
be in
“Turbo Freeze”
mode for 72 hours and the
snow flake
will
be highlighted. After the 72 hours is completed,
“Turbo Freeze”
turns off automatically. The snowflake will turn off to show that
“Turbo Freeze”
is off. To exit “
Turbo Freeze”
before the 72 hour
automatic shutoff, press
Options
until the indicator for “
Turbo
Freeze”
is highlighted and press
Set
. The
snowflake
will go off
showing that
“Turbo Freeze”
is not active.
Control Lock
To lock the controls, press
Options
until the display reads
“Lock
Controls”
and then press
Set
. The
locked indicator light
will
be displayed. To unlock, press and hold
Set
for 3 seconds. The
indicator light will go off and the control panel will be unlocked.
Power Off
To turn the freezer off, press
Options
the display reads
“Power Off”.
Press and hold
Set
for 3 seconds. When the freezer is off, the only
words illuminated will be
“Power Off”
and
“Press & Hold”
(referring to
the
Set
pad). To power back on, press and hold
Set
for 3 seconds. The
unit will then be in standby mode.
Power Fail
If your unit has lost power, the control panel will display
“Power Fail”
and the number of hours that your unit has been without power up to
a maximum of 50 hrs once the power has been restored. The alarm
will sound until the condition is acknowledged by pressing
Set
or any
other button on the control panel.
Door Ajar
If your door has been left open for more than 5 minutes, the control
panel will display
“Door Ajar”
and will sound an alarm until the door
has been closed or any button is pressed on the control panel. If a
button on the control panel has been pressed but the door has not
been closed,
“Door Ajar”
will continue to be displayed on the control
panel until the door has been closed.
High Temp Light
The high temperature light will illuminate until the freezer
reaches 23° F (-5° C) (safe zone) and the cabinet reaches the set
temperature.
C or F Setting
To change between
or
, press and hold the
-
and
+
pads at the
same time for 5 seconds.
Electronic Temperature Control
High Temp Light
Door Ajar Light
Control Lock
Indicator
Indicator Light
Turbo Freeze Light
Turbo Freeze
Temp Indicator
for °F or °C
Power Fail
Indicator Light
Power Off Light
Lock Controls Light
Exit Light
Options
Pad
Set Pad
Press & Hold Light
Increase Pad
Decrease Pad