GE GFDR480EFWW Installation Instructions - Page 37
Stacking The Washer And, Dryer If Desired Cont., Installing The Stack Bracket
View all GE GFDR480EFWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installation Instructions STACKING THE WASHER AND DRYER (if desired) (cont.) INSTALLING THE STACK BRACKET KIT STACKING KIT GEFLSTACK CONTENTS (OPTIONAL ACCESSORY) NOTE: Models GFDR480, GFDR485, GFWR4800 and GFWR4805 cannot be stacked. 1 REMOVE THE DRYER LEVELING LEGS A. Carefully lay the dryer on its side. Use the packing material so you don't scratch the finish on the dryer. Left hand bracket 4 #12 x 1" screws Right hand bracket 4 #8 x 1/2" screws 4 rubber pads B. Use an open-end wrench or pliers to remove the dryer leveling legs. TOOLS YOU WILL NEED Phillips screwdriver Gloves Open-ended wrench Level Pliers Back out and remove all 4 leveling legs 2 INSTALL RUBBER PADS TO DRYER BASE Locate the 4 rubber pads in the parts package. Remove the adhesive backing and firmly place over each bracket where you removed the leveling legs. INSTALLATION PREPARATION Remove the packaging. Flatten the product carton to use as a pad to lay the dryer down on its side. Continue using the carton to protect the finished floor in front of the installation location. Place pads over all four leveling leg brackets 37