GE GTS18JCPCC Use and Care Manual - Page 18
Re-hang The Refrigerator, Re-hang The Freezer Door, Cont., Transfer Freezer Door
UPC - 084691080282
View all GE GTS18JCPCC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installation Instructions REVERSING THE DOOR SWING (CONT.) 8 TRANSFER FREEZER DOOR HANDLE TO THE RIGHT (CONT.) Stainless steel handle 1 (on some models): Attach the handle to the fastener and tighten with the 3/32″ Allen wrench (supplied). Line up the handle with the screw holes in 2 the bottom of the door and tighten the screws. 9 RE-HANG THE REFRIGERATOR DOOR Lower the refrigerator door onto the bottom hinge pin. 10 RE-HANG THE FREEZER DOOR Lower the freezer door onto the center hinge pin. Be sure the washer is in place. Center Hinge Pin Plastic Washer Lift the top hinge so the pin fits into the door socket. Support the door on the handle side and make sure the door is straight and the gap between the doors is even across the front. While holding the door in place, tighten the top hinge screws. Plastic Washer Straighten the door and line it up with the center hinge bracket. Reinstall the center hinge pin with a 3/8″ socket. Turn it until it extends through the hinge bracket and into the door. Plastic Washer Hinge Pin Center Hinge Bracket Refrigerator Door 18