GE GTX22EASKWW Installation Instructions - Page 19

Installation Instructions REVERSING THE DOOR B REVERSING THE DOOR - GLASS PANEL DOOR MODELS 1 Open the door approximately 130 degrees. With a putty knife, remove the 4 plastic caps located along the left side of the front panel and set them aside. Plastic Cap (4) B REVERSING THE DOOR - GLASS PANEL DOOR MODELS (cont.) 4 Remove both the blind plate and the strike plate and install them in the opposite positions. Blind plate Left side of front panel 2 Remove the bottom screw from each hinge (right side) and partially insert them into each top hinge hole on the left side. NOTE: All 4 front panel hinge screws will now be in the top hinge holes - 2 on the left and 2 on the right. Strike plate 5 Remove the 4 door hinge screws, 6 inside screws and 2 pocket screws. Lift the inner door upwards using a flat blade screwdriver. Inside screws Pocket screws Inside screw Inner door 3 Loosen each top hinge screw on right side. Remove the door and place it on a protective flat surface to avoid any damage. Loosen each top hinge screw on right side Door hinge screws Outer door Inside screws 19