GE JGBS23 Installation Instructions - Page 23

Operating, Instructions, Installation, Troubleshooting, Safety Instructions, Consumer Support

Page 23 highlights

Safety Instructions Operating Instructions Care and Cleaning ge.com Cooktop Surface To avoid damaging the porcelain enamel surface of the cooktop and to prevent it from becoming dull, clean up spills right away. Foods with a lot of acid (tomatoes, sauerkraut, fruit juices, etc.) or foods with high sugar content could cause a dull spot if allowed to set. When the surface has cooled, wash and rinse. For other spills such as fat spatterings, etc., wash with soap and water once the surface has cooled. Then rinse and polish with a dry cloth. Be careful when you clean the cooktop because the area over the pilot will be hot (on models with standing pilots). NOTE: Do not store flammable materials in an oven or near the cooktop. Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. NOTE: Do not lift the cooktop on sealed burner models. Lifting the cooktop can lead to damage and improper operation of the range. Stainless Steel Surfaces (on some models) Do not use a steel wool pad; it will scratch the surface. To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface. To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our toll-free number: National Parts Center 800.626.2002 (U.S.) 888.261.3055 (Canada) ge.com (U.S.) www.GEAppliances.ca (Canada) Some models have dual support rods that will hold the cooktop up while you clean underneath it. Lift-Up Cooktop (on models with standard twin burners) Clean the area under the cooktop often. Built-up soil, especially grease, may catch on fire. To make cleaning easier, the cooktop may be lifted up. NOTE: Do not lift the cooktop on sealed burner models. Lifting the cooktop can lead to damage and improper operation of the range. To raise the cooktop: Be sure the burners are turned off. Clean under the cooktop with hot, soapy water and a clean cloth. If you removed your surface burners while cleaning, make sure they are properly seated when replacing them. After cleaning, lower the cooktop (be careful not to pinch your fingers). Lower cooktop gently to avoid blowing out pilot flames (on standing pilot models). Replace drip pans (if so equipped) and grates. Remove the grates and drip pans (if so equipped). Grasp the two front burner wells and lift up. Installation Instructions Troubleshooting Tips Consumer Support 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

23
ge.com
Cooktop Surface
To avoid damaging the porcelain enamel
surface of the cooktop and to prevent it
from becoming dull, clean up spills right
away. Foods with a lot of acid (tomatoes,
sauerkraut, fruit juices, etc.) or foods with
high sugar content could cause a dull spot
if allowed to set.
When the surface has cooled, wash and
rinse. For other spills such as fat spatterings,
etc., wash with soap and water once the
surface has cooled. Then rinse and polish
with a dry cloth.
Be careful when you clean the cooktop
because the area over the pilot will be hot
(on models with standing pilots).
NOTE:
Do not lift the cooktop on sealed
burner models. Lifting the cooktop can lead to
damage and improper operation of the range.
NOTE:
Do not store flammable materials
in an oven or near the cooktop. Do not
store or use combustible materials,
gasoline or other flammable vapors and
liquids in the vicinity of this or any other
appliance.
Lift-Up Cooktop
(on models with standard twin burners)
Clean the area under the cooktop often.
Built-up soil, especially grease, may catch
on fire.
To make cleaning easier, the cooktop may be
lifted up.
NOTE:
Do not lift the cooktop on sealed
burner models. Lifting the cooktop can lead to
damage and improper operation of the range.
To raise the cooktop:
Be sure the burners are turned off.
Remove the grates and drip pans
(if so equipped).
Grasp the two front burner wells and
lift up.
Clean under the cooktop with hot, soapy
water and a clean cloth. If you removed your
surface burners while cleaning, make sure
they are properly seated when replacing
them.
After cleaning, lower the cooktop (be
careful not to pinch your fingers). Lower
cooktop gently to avoid blowing out pilot
flames (on standing pilot models).
Replace drip pans (if so equipped) and grates.
Some models have dual support
rods that will hold the cooktop up
while you clean underneath it.
Stainless Steel Surfaces
(on some models)
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface in
the direction of the grain. Follow the cleaner
instructions for cleaning the stainless steel
surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call
our toll-free number:
National Parts Center
800.626.2002 (U.S.)
888.261.3055 (Canada)
ge.com (U.S.)
www.GEAppliances.ca (Canada)
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting
Tips
Safety Instructions
Consumer Support