GE JNM1541 Installation Instructions - Page 20
Adapting Microwave Blower for Recirculation, AFTER: Fan Blade, Openings Facing, Forward
View all GE JNM1541 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installation Instructions C3. ADAPTING MICROWAVE BLOWER FOR RECIRCULATION 1 Remove and save the screw that holds the blower motor door closed on the back and the blower retaining screw on the top of the door. Blower Retaining Screw Blower Back of Microwave Oven Blower Motor Door Retaining Screw 2 Open the blower door by lifting it up at the back of the microwave oven. Remove and save the blower retaining screw. 4 Roll the blower unit 90° so that fan blade openings are facing toward the front of the microwave. BEFORE: Fan Blade Openings Facing Up Roll Blower Retaining Screw 3 Carefully pull out the blower unit. The wires will extend far enough to allow you to adjust the blower unit. AFTER: Fan Blade Openings Facing Forward NOTE: Make sure wires remain routed in the grooves of the motor frame. 20