GE JNM1541 Installation Instructions - Page 21

Installation Instructions C3. ADAPTING MICROWAVE BLOWER FOR RECIRCULATION (cont.) 5 Place the blower unit back into the opening. CAUTION: Do not pull or stretch the blower unit wiring. Make sure the wires are not pinched. 6 Close the blower door. Secure the blower and blower door to the microwave oven using the retaining screws from Steps 1 and 2. Blower Retaining Screw Blower Back of Microwave Oven Blower Motor Door Retaining Screw Blower Retaining Screw C4. MOUNT THE MICROWAVE OVEN CAUTION: FOR EASIER INSTALLATION AND PERSONAL SAFETY, WE RECOMMEND THAT TWO PEOPLE INSTALL THIS MICROWAVE OVEN. IMPORTANT: Do not grip or use handle during installation. NOTE: If your cabinet is metal, use the nylon grommet around the power cord hole to prevent cutting of the cord. NOTE: We recommend using filler blocks if the cabinet front hangs below the cabinet bottom shelf. IMPORTANT: If filler blocks are not used, case damage may occur from overtightening screws. NOTE: When mounting the microwave oven, thread power cord through hole in bottom of top cabinet. Keep it tight throughout Steps 1-3. Do not pinch cord or lift oven by pulling cord. 1 Lift microwave, tilt it forward, and hook slots at back bottom edge onto four lower tabs of mounting plate. 2 Rotate front of oven up against cabinet bottom. 21