GE JVM1665DNWW Installation Instructions - Page 14
Adjust the Exhaust Adapter, Connecting Ductwork, continued
UPC - 084691187370
View all GE JVM1665DNWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Instructions A4. MOUNT THE OVEN (continued) Cabinet Front Cabinet Bottom Shelf Filler Block Equivalent to Depth of Cabinet Recess Self-Aligning Screw Oven Top 3 Attach the oven to the top cabinet by inserting 3 self-aligning screws through outer top cabinet holes. Turn two full turns on each screw. Be sure to keep power cord tight. Be careful not to pinch the cord, especially when mounting flush to bottom of cabinet. A5. ADJUST THE EXHAUST ADAPTER Open the top cabinet and adjust the exhaust adapter to connect to the house duct. Damper Back of Oven A6. CONNECTING DUCTWORK House Duct 4 Tighten the three screws to the top of the oven completely. (While tightening screws, hold the oven in place against the wall and the top cabinet.) 5 Install grease filters. See the Owner's Manual packed with the oven. 1 Extend the house duct down to connect to the exhaust adapter. 2 Seal exhaust duct joints using duct tape. 14