GE JVM1665DNWW Installation Instructions - Page 15
Outside Back Exhaust, Preparing Rear Wall forOutside Back Exhaust
UPC - 084691187370
View all GE JVM1665DNWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation Instructions B OUTSIDE BACK EXHAUST (Horizontal Duct) INSTALLATION OVERVIEW B1. Prepare Rear Wall B2. Attach Exhaust Adapter to Wall Plate B3. Attach Mounting Plate to Wall B4. Prepare Top Cabinet B5. Adjust Blower B6. Mount the Oven B1. PREPARING THE REAR WALL FOR OUTSIDE BACK EXHAUST You need to cut an opening in the rear wall for outside exhaust . B2. ATTACH THE EXHAUST ADAPTER TO THE OVEN REAR PANEL 1 Unscrew and remove the exhaust adapter assembly from the top of the oven. Exhaust Adapter 2 Attach the exhaust adapter to the oven rear panel by sliding it into the guides at the top center of the back of the oven. Exhaust Adapter Damper (hinge side up) 1 Read the instructions on the REAR WALL TEMPLATE. 2 Tape it to the rear wall, lining up with the holes previously drilled for holes A and B in the wall plate. 3 Cut the opening, following the instructions of the REAR WALL TEMPLATE. Guide Guide Locking Tabs Push in securely until it is in the lower locking tabs. Take care to assure the damper hinge is installed so that it is at the top and that the damper swings freely. 15