GE P2S920SEFSS Use and Care Manual - Page 17
Oven Racks and Rack Positions, USING THE OVEN - manual
View all GE P2S920SEFSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
USING THE OVEN: Oven Racks and Rack Positions Oven Racks and Rack Positions Your oven has six rack positions. Recommended rack positions for various types of foods are provided in the Cooking Guide. Adjusting rack position is one way to impact cooking results. For example, if you would prefer darker tops on cakes, muffins, or cookies, try moving food one rack position higher. If you find foods are too brown on top try moving them down next time. When baking with multiple pans and on multiple racks, ensure there is sufficient space between pans to allow air to flow. Flat Racks When placing and removing cookware, pull the rack out to the bump (stop position) on the rack support. To remove a rack, pull it toward you, tilt the front end up and pull it out. To replace, place the curved end of the rack (stop-locks) onto the oven supports, tilt up the front of the rack and push the rack in. Racks may become difficult to slide, especially after a self-clean. Put some vegetable oil on a soft cloth or paper towel and rub onto the left and right edges. Extension Racks (on some models) Extension racks have a frame that locks into the rack supports on both sides. Once the frame is locked into place, always pull the rack out, by its upper front rail, to its full extension stop position, when placing or removing cookware. If extension racks are difficult to extend, lubricate the racks with the graphite lubricant provided with your oven. Remove the rack from the oven, remove debris in the slide tracks with a paper towel, shake the graphite lubricant and place 4 small drops on the two bottom tracks of the left and right sides. Open and close the rack several times to distribute the lubricant. To order additional graphite lubricant, read the Assistance and Accessories section at the beginning of this manual. To Replace An Extension Rack: 1. Place the curved end of the rack onto the rack supports 2. Tilt the front of the rack up and push the rack in. If extension racks are difficult to replace or remove, wipe the oven rack supports with cooking oil. Do not wipe oil on the rack slides. To Remove An Extension Rack: 1. Make sure the rack is pushed all the way into the oven. 2. Firmly holding onto both the upper and lower front rails, pull the rack toward you, tilt the front end up and pull the rack out 49-85212-1 17