GE PB970DP Use and Care Manual - Page 46
Locked/door
View all GE PB970DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Before You Call For Service... Troubleshooting Tips Problem Clock and timer do not work Possible Causes What To Do Plug on range is not completely • Make sure electrical plug is plugged into a live, properly inserted in the electrical outlet. grounded outlet. A fuse in your home • Replace the fuse or reset the circuit breaker. may be blown or the circuit breaker tripped. Oven controls improperly set. • See the Using the kitchen timer section. Oven will not self-clean The oven temperature is • Allow the range to cool and reset the controls. too high to set a self-clean operation. Oven controls improperly set. • See the Using the self-cleaning upper and lower ovens section. The probe is plugged into the outlet in the oven. (on some models) • Remove the probe from the oven. "Crackling" or "popping" sound This is the sound of the metal heating and cooling during both the cooking and cleaning functions. • This is normal. Excessive smoking Excessive soil. • Touch the CLEAR/OFF pad. Open the windows to during a clean cycle rid the room of smoke. Wait until LOCKED/DOOR goes off. After the oven cools, wipe up the . excess soil and reset the clean cycle. Oven door will not Oven too hot. open after a clean cycle • Allow the oven to cool below locking temperature. Oven not clean after a Oven controls not properly set. • See the Using the self-cleaning upper and lower ovens cycle section. Oven was heavily soiled. • Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean . again or for a longer period of time. clean "LOCKED" flashes in the display The self-clean cycle has been • Close the oven door. selected but the door is not closed. "LOCKED" is on when you want to cook The oven door is locked because the temperature inside the oven has not dropped below the locking temperature. • Touch the CLEAR/OFF pad. Allow the oven to cool. "F-" and a number You have a function error code. • Disconnect all power to the range for at least or letter flash 30 seconds and then reconnect power. If the function in the display error code repeats, call for service. 46