GE PB978TPWW Use and Care Manual - Page 38

Care and cleaning of the range. Oven frame Door frame Release buttons Lift-Off Upper Oven Door (on some models) To remove the door: To replace the door: Fully open the door. L ift up on the hinge lock toward the oven frame until they stop. C lose the door to 45 degrees (you will feel the door stop). The hinge lock will contact the oven frame. O n both sides of the door, press down on the release buttons on each hinge. L ift door up until it is clear of the hinge. P ull on hinge arms slightly to relieve pressure on the locking tabs. P ush the hinge locks down onto the hinge. P ush the hinges in toward the unit so they are closed. P ull the hinges down away from the oven frame to the fully open position. L ift up on the hinge locks toward the oven frame until they stop. T he hinges will release to the 45-degree position. The hinge locks will contact the oven frame. S lide the door back onto the hinges. Make sure the buttons pop back out. F ully open the door. P ush the hinge locks down onto the hinge. C lose the oven door. Push in Pull down Flat rack Handles Use the rack with the two front handles in the upper oven. Use the rack without the two front handles in the lower oven. Oven Racks All oven racks may be cleaned by hand with an abrasive cleaner or steel wool. After cleaning, rinse the racks with clean water and dry with a clean cloth. Gray porcelain-coated oven racks may remain in the oven during the self-cleaning cycle without being damaged. The nickel-plated oven racks may remain in the oven during the . self-cleaning cycle, but they will lose their luster and become hard to slide. It will be necessary to grease all oven rack side edges with a light coating of vegetable oil after cleaning them by hand or in the oven. This will help maintain the ease of sliding the racks in and out of the oven. 38