GE PGS968DEP Use and Care Manual - Page 35
Painted Surfaces, Stainless Steel Surfaces, Oven Vent, Control Panel, Removable Oven Floor
View all GE PGS968DEP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
GEAppliances.com Stainless Steel Surfaces (on some models) Do not use a steel wool pad; it will scratch the surface. To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface. To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer or Mabe Parts Store nearest you, please call our toll-free number: National Parts Center 1.800.626.2002 (U.S.) 1.800.661.1616 (Canada) GEAppliances.com Center vent Oven floor Painted Surfaces Painted surfaces include the top and sides of the door, and the drawer front. Clean these with soap and water or a vinegar and water solution. Do not use commercial oven cleaners, cleaning powders, steel wool or harsh abrasives on any painted surface. Oven Vent The oven is vented through an opening in the cooktop under the grille. Never cover the opening with aluminum foil or any other material. This would prevent the oven vent from working properly. Control Panel If desired, the touch pads may be turned off before cleaning. See the Control Lockout section. Clean up splatters with a damp cloth. You may also use a glass cleaner. Remove heavier soil with warm soapy water. Do not use abrasives of any kind. Turn on the touch pads after cleaning. Removable Oven Floor To remove the oven floor for easier cleaning: Remove the oven door using the instructions in the Lift-Off Oven Door section. Grasp oven floor at the rear finger slots on each side, lift it up, push it back and pull it out. Clean the oven floor with warm soapy water. IMPORTANT: Always replace the removable floor before the next use. 35