GE PGS968DEP Use and Care Manual - Page 40
Troubleshooting Tips
View all GE PGS968DEP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Before you call for service... Troubleshooting Tips Problem Clock and timer do not work Oven will not self-clean "Crackling" or "popping" sound Excessive smoking during a clean cycle Oven door will not open after a clean cycle Oven not clean after a clean cycle "LOCKED" flashes in the display "LOCKED" light is on when you want to cook "F-" and a number or letter flash in the display Possible Causes Plug on range is not completely inserted in the electrical outlet. A fuse in your home may be blown or the circuit breaker tripped. Oven controls improperly set. The oven temperature is too high to set a self-clean operation. Oven controls improperly set. The probe is plugged into the outlet in the oven. This is the sound of the metal heating and cooling during both the cooking and cleaning functions. Excessive soil. Oven too hot. Oven controls not properly set. Oven was heavily soiled. The self-clean cycle has been selected but the door is not closed. The oven door is locked because the temperature inside the oven has not dropped below the locking temperature. You have a function error code. If the function code repeats. What To Do • Make sure electrical plug is plugged into a live, properly grounded outlet. • Replace the fuse or reset the circuit breaker. • See the Using the clock and timer section. • Allow the range to cool and reset the controls. • See the Using the self-cleaning oven section. • Remove the probe from the oven. • This is normal. • Touch the CLEAR/OFF pad. Open the windows to rid the room of smoke. Wait until the LOCKED light goes off. Wipe up the excess soil and reset the clean cycle. • Allow the oven to cool below locking temperature. • See the Using the self-cleaning oven section. • Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time. • Close the oven door. • Touch the CLEAR/OFF pad. Allow the oven to cool. • Touch the CLEAR/OFF pad. Put the oven back into operation. • Disconnect all power to the range for at least 30 seconds and then reconnect power. If the function error code repeats, call for service. 40