GE PGSS5PJY Owners Manual - Page 23

Installation Instructions, REMOVING THE FREEZER DRAWERS, TOP DRAWER

Get GE PGSS5PJY - Profile 24.9 cu. Ft. Bottom-Freezer Refrigerator PDF manuals and user guides View all GE PGSS5PJY manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Installation Instructions REMOVING THE FREEZER DRAWERS The freezer drawers can be removed, if needed, to fit through tight areas. Read these instructions completely and carefully. TOP DRAWER 1 REMOVE THE BASKET A Open the freezer drawer until it stops. B Cut the 2 wire ties off of the basket with wire cutters. C Lift the front end of the basket so that the front two alignment tabs come out of the slide bracket first. D Then rotate the front edge of the drawer up while lifting the remaining two rear alignment tabs out of the slide bracket. Pull the basket up and out of the drawer. A 2 REMOVE THE DRAWER FRONT FROM THE SLIDES A Remove the 8 hex head screws from the door and remove the door. B Set the drawer front on a non-scratching surface. C Push the rail assemblies back into the cabinet. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
TOP DRAWER
Installation Instructions
REMOVING THE FREEZER DRAWERS
REMOVE THE BASKET
Open the freezer drawer until it stops.
Cut the 2 wire ties off of the basket with wire
cutters.
Lift the front end of the basket so that the front
two alignment tabs come out of the slide
bracket first.
Then rotate the front edge of the drawer up
while lifting the remaining two rear alignment
tabs out of the slide bracket. Pull the basket up
and out of the drawer.
1
A
C
D
The freezer drawers can be removed, if needed, to fit
through tight areas.
Read these instructions completely and carefully.
REMOVE THE DRAWER FRONT FROM
THE SLIDES
Remove the 8 hex head screws from the door
and remove the door.
Set the drawer front on a non-scratching
surface.
Push the rail assemblies back into the cabinet.
2
A
A
B
C
B
23