GE PI6000 Installation Instructions - Page 1

6000 Series PIR Model PI6000 - with 30 lb. pet immunity Model 6000 - with high density (HD) performance lens Installation Instructions T T Back housing Circuit board C NC Ð + Shield 267 266 266 Lens Front housing Figure 1. Detector (Exploded) Note Use a screwdriver to undo the latch on the bottom of the detector. Description The 6000 Series Passive Infrared Detectors are designed for use in residential applications. These detectors utilize dual pyroelectric sensors with jumper selectable pulse count (two- or three-pulse mode). Advanced signal processing provides high immunity to false trips - RFI, lightning, vibration, and rapid temperature changes. An interchangeable, opaque Fresnel lens blocks visible light and provides the ability to select the best coverage pattern for the site. The lens is part of a sealed optic enclosure which isolates the pyroelectric sensor from drafts and insects, common sources of false trips. The 6000 series comes with a closed loop alarm contact and a closed loop tamper switch. Flat Wall 3/8" 0.95cm Corner 3/8" 0.95cm Figure 2. Mounting .Selecting a Location • Mount the detector at a height of 7 to 9 feet (2.1 to 2.7m) . See Mounting Height Settings. • Mount the detector either flat on the wall or in a corner and at least 3/8" (0.95cm) from the ceiling. See Figure 2. • Do not locate the detector where it may be exposed to false alarm sources, such as: - heat sources in the field of view - direct or reflected sunlight - strong air drafts (fans, air conditioners, etc.) on unit • Do not aim the detector at windows or glass doors. • Mount the detector on a rigid, vibration-free surface. • Do not locate the detector on a surface exposed to moisture. • Do not locate the detector where the ambient temperature is below 14°F (-10°C) or above 122°F (50°C). • PIRs require a clear line of sight. Inform end-users not to block the coverage pattern with inventory, furniture, decorations etc. 6000 Series PIR Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]