GE PNM9216SKSS Use and Care Manual - Page 21
Vent Fan Sync, Sync Auto Off, Surface Light Sync, Surface Light, Filter Replace Reminder, Vent Fan,
View all GE PNM9216SKSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
GEAppliances.com Surface Light Sync Selects the light level at which the surface lights will automatically turn on when paired range' burner is turned on. Note: Default is 12 hours. 1 Press the Settings button and turn the dial to select Surface Light Sync. Press the dial to enter. 2 Turn the dial to select sync mode (Off, Low, High). Select Off to disable this feature. Surface light will turn on manually. 3 Press the dial to activate. Vent Fan Sync Selects the fan speed at which the vent fan will automatically turn on when paired range's burner is turned on. Note: Default is OFF. 1 Press the Settings button and turn the dial to select Vent Fan Sync. Press the dial to enter. 2 Turn the dial to select Vent Fan Sync mode (Boost, High, Medium, Low, Off). Select Off to disable this feature. Vent fan will turn on manually. 3 Press the dial to activate. Sync Auto Off When the Light / Vent fan sync mode is enabled (ON), this will automatically turn OFF the light / fan when the range burner has been turned off. Note: Default is 12 hours. 1 Press the Settings button and turn the dial to select Sync Auto Off Press the dial to enter. 2 Turn the dial to select the period of time the light / fan will remain on until the microwave automatically turns it off. Filter Replace Reminder The charcoal/grease filter should be replaced when it is noticeably dirty / discolored(usually after 6-12 months, depending on hood usage) or filter replacement LED is on. When the Filter Replace LED turned on, replace filter and press Reset Filter and hold for 3 seconds to reset. Surface Light Press Surface Light once for bright light, twice for the night light or a third time to turn the light off. Surface light will turn on automatically when the cooktop burner is turned on with Chef Connection. Vent Fan The vent fan removes steam and other vapors from surface cooking. Press Vent Fan once for boost fan speed, twice for high fan speed, three times for medium fan speed. forth time for low fan speed or a fifth time to turn the fan off.. NOTE: The FAN indicator will be lit while the fan is operating. Vent fan will turn on automatically when the cooktop burner is turned on with Chef Connection. Automatic Fan An automatic fan feature protects the microwave from too much heat rising from the cooktop below it. It automatically turns on if it senses too much heat. If you have turned the fan on you may find that you cannot turn it off. The fan will automatically turn off when the internal parts are cool. It may stay on for 30 minutes or more after the cooktop and microwave controls are turned off. 21