GE PSFW3YGXSS Owners Manual - Page 15
Removing Ice Bin, Accessing Ice and Reaching, the Power Switch on Dispenser, Models
UPC - 084691167648
View all GE PSFW3YGXSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
About the automatic icemaker. (cont) GEAppliances.com Models with tilt out ice bin To access ice and reach the icemaker power switch: Lift the bin, then pull it forward until the bin stops. Accessing Ice and Reaching the Power Switch on Dispenser Models There are two types of ice storage bins on dispenser models. One has a shelf above the bin, the other does not. Special note for models with tilt-out ice bin: These models have a tilt-out ice bin. The bin can be tilted out as shown in the illustrations, and it will hold itself up while you take ice out or turn the icemaker power switch on and off. Be sure to put the bin back in place before closing the door. Models with a shelf above the ice bin Shelf Ice Bin To access ice, pull the bin forward. Shelf Lower the bin to access ice or reach the power switch. NOTE: In order to take full advantage of the tiltout ice bin, only store items on the shelf below the ice bin that are no taller than the lowest point on the bin. Ice Bin To reach the power switch, pull the shelf straight out. Always be sure to replace the shelf. On some models, to access ice or reach the power switch: Pull the bin forward until the bin stops. Lower the bin to access ice or reach the power switch. Removing Ice Bin (dispenser models) CAUTION: The ice bin is heavy when full. Set the power switch to the OFF position before removing the bin. When replacing the bin, be sure to press it firmly into place. If it does not go all the way back, remove it and rotate the drive mechanism 1/4 turn. Then push the bin back again. Rotate Drive Mechanism Dispenser Models only 15