Gigabyte B360M D3V Users Manual - Page 32
OffBoard SATA Controller Configuration, Super IO Configuration, USB Configuration
View all Gigabyte B360M D3V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
`` OffBoard SATA Controller Configuration Displays information on your M.2 PCIe SSD if installed. `` Trusted Computing Enables or disables Trusted Platform Module (TPM). `` Super IO Configuration && Serial Port Enables or disables the onboard serial port. (Default: Enabled) && Parallel Port Enables or disables the onboard parallel port. (Default: Enabled) `` Intel(R) Bios Guard Technology Enables or disables the Intel® BIOS Guard feature, which protects the BIOS from malicious attacks. `` USB Configuration && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Disabled) && USB Mass Storage Driver Support Enables or disables support for USB storage devices. (Default: Enabled) && Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) && Mass Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. `` Network Stack Configuration && Network Stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disabled) && Ipv4 PXE Support Enables or disables IPv4 PXE Support. This item is configurable only when Network Stack is enabled. && Ipv4 HTTP Support Enables or disables HTTP boot support for IPv4. This item is configurable only when Network Stack is enabled. && Ipv6 PXE Support Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled. && Ipv6 HTTP Support Enables or disables HTTP boot support for IPv6. This item is configurable only when Network Stack is enabled. && PXE boot wait time Allows you to configure how long to wait before you can press to abort the PXE boot. This item is configurable only when Network Stack is enabled. (Default: 0) - 32 -