Gigabyte B365M POWER User Manual - Page 32
PXE boot wait time, Media detect count, SATA Controllers, SATA Mode Selection, Aggressive LPM Support
View all Gigabyte B365M POWER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
&& PXE boot wait time Allows you to configure how long to wait before you can press to abort the PXE boot. This item is configurable only when Network Stack is enabled. (Default: 0) && Media detect count Allows you to set the number of times to check the presence of media. This item is configurable only when Network Stack is enabled. (Default: 1) `` NVMe Configuration Displays information on your M.2 NVME PCIe SSD if installed. `` SATA And RST Configuration && SATA Controller(s) Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection Specifies the operating mode of the integrated SATA controllers. Intel RST Premium With Intel Optane System Acceleration Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset SATA controllers. (Default: Enabled) && Port 0/1/2/3 Enables or disables each SATA port. (Default: Enabled) && Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && Configured as eSATA Enables or disables support for external SATA devices. - 32 -