Gigabyte B650 AERO G User Manual - Page 17

USB Type-C® Port (with USB 3.2 Gen 2 Support) This port supports GIGABYTE VisionLINK technology and has display and data transmission capabilities with 20V@3A(60W) of power delivery. You can connect a drawing tablet to this port. This port also supports standard USB Type-C® and DisplayPort display output. You can connect a USB Type-C® monitor to this port or use an adapter cable to connect a standard DisplayPort monitor. The maximum supported resolution is 3840x2160@144 Hz when using a DisplayPort monitor, but the actual resolutions supported are dependent on the monitor being used. Also, the connector is reversible and supports the USB 3.2 Gen 2 specification and is compatible to the USB 3.2 Gen 1 and USB 2.0 specification. You can use this port for USB devices, too. USB 3.2 Gen 1 Port The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is compatible to the USB 2.0 specification. Use this port for USB devices. RJ-45 LAN Port The Gigabit Ethernet LAN port provides Internet connection at up to 2.5 Gbps data rate. The following describes the states of the LAN port LEDs. Speed LED Activity LED Speed LED: State Description Activity LED: State Description Green 2.5 Gbps data rate Blinking Data transmission or receiving is occurring Orange 1 Gbps data rate On No data transmission or receiving is occurring LAN Port Off 100 Mbps data rate USB 3.2 Gen 2 Type-A Port (Q-Flash Plus Port) The USB 3.2 Gen 2 port supports the USB 3.2 Gen 2 specification and is compatible to the USB 3.2 Gen 1 and USB 2.0 specification. Use this port for USB devices. Before using Q-Flash Plus , (Note) make sure to insert the USB flash drive into this port first. Line Out/Front Speaker Out The line out jack. Mic In/Rear Speaker Out The Mic in jack. Optical S/PDIF Out Connector This connector provides digital audio out to an external audio system that supports digital optical audio. Before using this feature, ensure that your audio system provides an optical digital audio in connector. Audio Jack Configurations: Jack Line Out/Front Speaker Out Headphone/ 2-channel a 4-channel a 5.1-channel a 7.1-channel a Mic In/Rear Speaker Out a a a Front Panel Line Out/Side Speaker Out Front Panel Mic In/Center/Subwoofer Speaker Out a a a You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings. && Please visit GIGABYTE's website for details on configuring the audio software. https://www.gigabyte.com/WebPage/698/realtek1220-audio.html (Note) To enable the Q-Flash Plus function, please navigate to the "Unique Features" page of GIGABYTE's website for more information. - 17 -