Gigabyte GA-6LXSG Manual - Page 35
SATA_DOM0/SATA_DOM1 SATA port 0 and port 1 DOM Jumpers, CAUTION, 3 pins
View all Gigabyte GA-6LXSG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
30/31) SATA_DOM0/SATA_DOM1 (SATA port 0 and port 1 DOM Jumpers) CAUTION! • If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2. • If the SATA DOM power is supplied by external power, set the jumper to pin 2-3. • If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage. Please refer to the pin definition table in the following. For SATA_DOM0 Pin No. Definition 1 1 P5V 2 SATA_DOM_0 3 GND SATA_DOM0 SATA_DOM1 For SATA_DOM1 Pin No. Definition 1 1 P5V 2 SATA_DOM_1 3 GND - 35 - Hardware Installation
- 35 -
Hardware Installation
30/31)
SATA_DOM0/SATA_DOM1 (SATA port 0 and port 1 DOM Jumpers)
SATA_DOM1
SATA_DOM0
1
1
CAUTION!
•
If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2.
•
If the SATA DOM power is supplied by external power, set the jumper to pin 2-3.
•
If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed
and set to
2-3 pins
(Default setting), in order to reduce any risk of hard disk damage.
Please refer to the pin definition table in the following.
Pin No.
Definition
1
P5V
2
SATA_DOM_0
3
GND
For SATA_DOM0
Pin No.
Definition
1
P5V
2
SATA_DOM_1
3
GND
For SATA_DOM1