Gigabyte GA-78LMT-S2PV Manual - Page 20

`` DRAM Configuration && DCTs Mode Allows you to set memory control mode. Ganged Sets memory control mode to single dual-channel. Unganged Sets memory control mode to two single-channel. (Default) && DDR3 Timing Items Manual allows all DRAM timing control items below to be configurable. Options are: Auto (default), Manual. && 1T/2T Command Timing Options are: Auto (default), 1T, 2T. && CAS# latency Options are: Auto (default), 4T~12T. && RAS to CAS R/W Delay Options are: Auto (default), 5T~12T. && Row Precharge Time Options are: Auto (default), 5T~12T. && Minimum RAS Active Time Options are: Auto (default), 15T~30T. && TwTr Command Delay Options are: Auto (default), 4T~7T. && Trfc0 for DIMM1, DIMM3 Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns. && Trfc1 for DIMM2, DIMM4 Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns. && Write Recovery Time Options are: Auto (default), 5T~8T, 10T, 12T. && Precharge Time Options are: Auto (default), 4T~7T. && Row Cycle Time Options are: Auto (default), 11T~42T. && RAS to RAS Delay Options are: Auto (default), 4T~7T. && Channel Interleaving Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. (Default: Enabled) && Rank Interleaving Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different ranks of the memory to increase memory performance and stability. (Default: Enabled) && DQS Training Control Enables or disables memory DQS training each time the system restarts. (Default: Skip DQS) && Memclock tri-stating Determines whether to enable memory clock tri-stating in CPU C3 or Alt VID mode. (Default: Disabled) - 20 -