Gigabyte GA-7IXE4 User Manual
Gigabyte GA-7IXE4 Manual
 |
View all Gigabyte GA-7IXE4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte GA-7IXE4 manual content summary:
- Gigabyte GA-7IXE4 | User Manual - Page 1
that may cause undesired operation. Representative Person's Name: ERIC LU Signature: Eric Lu Date: Jul. 4, 2000 in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Gigabyte GA-7IXE4 | User Manual - Page 2
Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) EN 55011 EN55013 EN 55014 EN 55015 EN 55020 EN 55022 - Gigabyte GA-7IXE4 | User Manual - Page 3
7IXE4 AMDTM Athlon AGP Motherboard USER'S MANUAL AMDTM Athlon Processor Motherboard REV. 1.0 Fourth Edition R-10-04-010615 - Gigabyte GA-7IXE4 | User Manual - Page 4
is divided into the following sections: 1) Revision List 2) Item Checklist Manual revision information Product item list 3) Features Product information & specification 4) Hardware Setup Instructions on setting up the motherboard 5) Performance & Block Diagram Product Performance & Block - Gigabyte GA-7IXE4 | User Manual - Page 5
Table Of Content Revision History P.1 Item Checklist P.2 Summary of Features P.3 7IXE4 Motherboard Layout P.5 Page Index for Connectors / Panel and Jumper Definition P.6 Performance List P.20 Block Diagram P.21 Memory Installation P.22 Page Index for BIOS Setup P.23 Appendix P.55 - Gigabyte GA-7IXE4 | User Manual - Page 6
- Gigabyte GA-7IXE4 | User Manual - Page 7
1.0 1.0 1.0 Revision Note Initial release of the 7IXE4 motherboard user's manual. Second release of the 7IXE4 motherboard user's manual. Third release of the 7IXE4 motherboard user's manual. Fourth release of the 7IXE4 motherboard user's manual. Date Jul.2000 Jul.2000 Jul.2000 Jun.2001 The author - Gigabyte GA-7IXE4 | User Manual - Page 8
Item Checklist ;The 7IXE4 Motherboard ;Cable for IDE / Floppy device ;Diskettes or CD (TUCD) for motherboard utilities †Internal COM B Cable (Optional) †Internal USB Cable (Optional) †Cable for SCSI device ;7IXE4 User's Manual Item Checklist 2 - Gigabyte GA-7IXE4 | User Manual - Page 9
Peripherals PS/2 Connector BIOS y 30.4 cm x 22 cm ATX SIZE form factor, 4 layers PCB. y AMD Athlon (K7) Socket A Processor y 256K/64K 2nd cache on die y Supports 500MHz ~ 1GHz and faster AMD 750, consisting of: y AMD 751 PCI/AGP Controller(PAC) y AMD 756 PCI ISA IDE Controller - Gigabyte GA-7IXE4 | User Manual - Page 10
Additional Features Summary of Features y Internal/External Modem Wake up y Keyboard Password Wake up y Mouse Wake up y LAN Wake up y System after AC back 4 - Gigabyte GA-7IXE4 | User Manual - Page 11
FLOPPY JP2 ATX POWER 7IXE4 Motherboard 7IXE4 Motherboard Layout PS/2 USB JP10 COM A J30 Socket A CPU LP T COM B J9 AMD751 IDE 2 IDE 1 JP15 AGP PCI1 PCI2 PCI3 PCI4 PCI5 ISA1 ISA2 7IXE4 JP4 JP9 DIMM3 DIMM2 DIMM1 JP1 Battery SW1 AMD756 JP13 J3 BZ1 USB JP5 J22 J6 BIOS JP12 - Gigabyte GA-7IXE4 | User Manual - Page 12
7IXE4 Motherboard Layout Page Index for CPU Speed Setup / Connectors / Panel and Jumper Definition Page CPU Speed Setup P.7 Connectors P.8 COM A / COM B / LPT Port P.8 USB Connector P.8 PS/2 Keyboard & PS/2 Mouse Connector P.9 JP2 (Power Fan) P.9 J9 (CPU Fan) P.10 J6 (System Fan) - Gigabyte GA-7IXE4 | User Manual - Page 13
7IXE4 Motherboard CPU Speed Setup The system bus frequency can be switched at 90MHz, 95MHz, 100MHz, 105MHz, 110MHz and 115MHz by adjusting SW1 (See Figure 1). 0 The CPU speed must match with the frequency RATIO. It will cause system hanging up if the frequency RATIO is higher than that of CPU. SW1: - Gigabyte GA-7IXE4 | User Manual - Page 14
Connectors COM A / COM B / LPT Port Connectors LPT Port USB Connector COM A COM B 5 6 78 12 34 Pin No. 1 2 3 4 5 6 7 8 Definition USB V0 USB D0USB D0+ GND USB V1 USB D1USB D1+ GND 8 - Gigabyte GA-7IXE4 | User Manual - Page 15
7IXE4 Motherboard PS/2 Keyboard & PS/2 Mouse Connector PS/2 Mouse PS/2 Mouse/ Keyboard Pin No. Definition 1 6 5 2 4 3 3 Data NC GND 2 1 4 5 PS/2 Keyboard 6 VCC(+5V) Clock NC JP2: Power Fan 1 Pin No. Definition 1 GND 2 +12V 3 SENSE 9 - Gigabyte GA-7IXE4 | User Manual - Page 16
J9: CPU Fan J6: System Fan Connectors 1 Pin No. Definition 1 GND 2 +12V 3 SENSE 1 Pin No. Definition 1 GND 2 +12V 3 SENSE 10 - Gigabyte GA-7IXE4 | User Manual - Page 17
7IXE4 Motherboard ATX Power Floppy Port Pin No. Definition 10 20 3,5,7,13,15-17 GND 1,2,11 3.3V 4,6,19,20 VCC 10 +12V 12 -12V 18 -5V 8 Power Good 1 11 9 5V SB stand by+5V 14 PS-ON(Soft On/Off) Red Line 11 - Gigabyte GA-7IXE4 | User Manual - Page 18
IDE1 (Primary), IDE2 (Secondary) Port Connectors USB Port Red Line IDE 1 IDE 2 Pin No. Definition 8 5 1 VCC 2 USB D0− 3 USB D0+ 1 4 4 5 GND VCC 6 USB D1− 7 USB D1+ 8 GND 12 - Gigabyte GA-7IXE4 | User Manual - Page 19
7IXE4 Motherboard IR: Infrared Connector (Optional) 1 Pin No. 1 2 3 4 5 Definition VCC (+5V) NC IR Data Input GND IR Data Output JP9: Ring Power On (Internal Modem Card Wake Up) 1 Pin No. Definition 1 Signal 2 GND 13 - Gigabyte GA-7IXE4 | User Manual - Page 20
JP4: Wake On LAN Connectors 1 Pin No. Definition 1 +5VSB 2 GND 3 Signal J30: HDT Herder Connector (For testing purpose only) 1 2 15 16 14 - Gigabyte GA-7IXE4 | User Manual - Page 21
PW P+P−P− HD GN 7IXE4 Motherboard Panel And Jumper Definition J22: For 2x11 Pins Jumper 1 1 1 1 S P K R E G D GN (Green Switch) GD (Green LED) HD (IDE Hard Disk Active LED) SPK (Speaker Connector) RE (Reset Switch) P+P−P−(Power LED) PW (Soft Power Connector) Open: Normal Operation Close: - Gigabyte GA-7IXE4 | User Manual - Page 22
JP10: PS/2 Keyboard Power On Panel and Jumper Definition JP1: Case Open 1 Pin No. Definition 1-2 close PS/2 Keyboard Power on Enabled 2-3 close PS/2 Keyboard Power on Disabled (Default) 1 Pin No. Definition 1 Signal 2 GND 16 - Gigabyte GA-7IXE4 | User Manual - Page 23
7IXE4 Motherboard JP12: BIOS Flash ROM Write Protection 1 Pin No. Definition Close Write Protection Open Normal (Default) 0Please set Jumper JP12 to "Open" to enabled BIOS write function when you update new BIOS or new device. JP5: Internal Buzzer Connector (Optional) 1 Pin No. Definition - Gigabyte GA-7IXE4 | User Manual - Page 24
JP3: Clear CMOS Panel and Jumper Definition 1 Pin No. Definition 1-2 close Clear CMOS (User had to short 1-2 till boot) 2-3 close Normal (Default) JP15: SIP Select (Optional) 1 Pin No. Definition 1-2 close Ext SIP(Default) 2-3 close Int SIP 18 - Gigabyte GA-7IXE4 | User Manual - Page 25
7IXE4 Motherboard Battery Danger of explosion if battery is incorrectly replaced. Replace only with the same or + equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. 19 - Gigabyte GA-7IXE4 | User Manual - Page 26
Performance List Performance List The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software - Gigabyte GA-7IXE4 | User Manual - Page 27
7IXE4 Motherboard Block Diagram AGP 66MHz Socket A 100MHz 14.318MHz System Bus 100MHz AMD 751 5 PCI 100MHz 66MHz 3.3V SDRAM 100MHz 33MHz ICS 9248-110/9179-06 ATA66 IDE Channels 33MHz 33MHz 14.318MHz 4 USB Ports AMD 756 8MHz COM Ports LPT Ports Winbond W83977 Game Port ISA Bus BIOS - Gigabyte GA-7IXE4 | User Manual - Page 28
to the two notch. Memory size can vary between sockets. Install memory in any combination table: DIMM DIMM1 DIMM2 DIMM3 168-pin SDRAM DIMM Modules Supports 16 / 32 / 64 / 128 / 256 MB Supports 16 / 32 / 64 / 128 / 256 MB Supports 16 / 32 / 64 / 128 / 256 MB X 1 pcs X 1 pcs X 1 pcs 22 - Gigabyte GA-7IXE4 | User Manual - Page 29
7IXE4 Motherboard Page Index for BIOS Setup Page Main Menu P.25 Standard CMOS Features P.28 BIOS Features Setup P.31 Chipset Features Setup P.34 Power Management Setup P.38 PNP/ PCI Configuration P.41 Load BIOS Defaults P.43 Load Setup Defaults P.44 Integrated Peripherals P.45 - Gigabyte GA-7IXE4 | User Manual - Page 30
BIOS Setup BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING SETUP - Gigabyte GA-7IXE4 | User Manual - Page 31
7IXE4 Motherboard GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections - Gigabyte GA-7IXE4 | User Manual - Page 32
BIOS Setup • Standard CMOS Setup This setup page includes all the items in standard compatible BIOS. • BIOS Features Setup This setup page includes all the items of AMI special enhanced features. • Chipset Features Setup This setup page includes all the items of chipset special features. • Power - Gigabyte GA-7IXE4 | User Manual - Page 33
7IXE4 Motherboard • IDE HDD auto detection Automatically configure hard disk parameters. • Save & Exit Setup Save CMOS value settings to CMOS and exit setup. • Exit Without Saving Abandon all CMOS value changes and exit setup. 27 - Gigabyte GA-7IXE4 | User Manual - Page 34
BIOS Setup Standard CMOS Setup The items in Standard CMOS Setup Menu (Figure 3) are divided into 10 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the or keys to select the value you want in each item. AMIBIOS - Gigabyte GA-7IXE4 | User Manual - Page 35
7IXE4 Motherboard • Time The times format in . The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. • Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been - Gigabyte GA-7IXE4 | User Manual - Page 36
. The system will halt and the following error message will appear in the mean time. You can run anti-virus program to locate the problem. Enabled Disabled Activate automatically when the system boots up causing a warning message to appear when anything attempts to access the boot sector or hard - Gigabyte GA-7IXE4 | User Manual - Page 37
7IXE4 Motherboard BIOS Features Setup AMIBIOS SETUP - BIOS FEATURES SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Quick Boot 1st Boot Device 2nd Boot Device 3rd Boot Device Try Other Boot Devices Floppy Access Control Hard Disk Access Control BootUp Num-Lock Floppy Drive Swap - Gigabyte GA-7IXE4 | User Manual - Page 38
BIOS Setup • Try Other Boot Device Yes Enabled other device to boot system. (Default Value) No Disabled other device to boot system. • Floppy Access Control Read-Write Read-Only Set Floppy Access Control: Read-Write. (Default Value) Set Floppy Access Control: Read Only. • Hard Disk Access - Gigabyte GA-7IXE4 | User Manual - Page 39
7IXE4 Motherboard • Security Option This category allows you to limit access to the Always and Setup, or just to Setup. Always Setup The system can not boot and can not access to Setup page will be denied if the correct password is not entered at the prompt. The system will boot, but access to - Gigabyte GA-7IXE4 | User Manual - Page 40
Hole DRAM Burst Refresh Graphics Aperture Size USB Function USB KB Legacy Support Disabled Disabled Enabled 64MB Enabled Disabled ESC: Quit Select Item F1 : to Manual. • Config SDRAM Timing Auto Manual Set Config SDRAM Timing to Auto. (Default value) Set Config SDRAM Timing to Manual. • - Gigabyte GA-7IXE4 | User Manual - Page 41
7IXE4 Motherboard • SDRAM Idle Cycle Limit This function specify the number of idle cycles to wait before precharging an idle bank.(Idle cycles are defined as cycles where no valid request is asserted to the MCT.) 0 Cycles 8 Cycles 12 Cycles 16 Cycles 24 Cycles 32 Cycles 48 Cycles Disabled Set - Gigabyte GA-7IXE4 | User Manual - Page 42
• SDRAM CAS Latency BIOS Setup This function specify the delay from SCAS[2:0]# to data valid. 2 Cycles 3 Cycles Set SDRAM CAS Latency to 2 Cycles. Set SDRAM CAS Latency to 3 Cycles. (Default value) • SDRAM TRCD Timing This function specify the delay from the activation of a bank to the time - Gigabyte GA-7IXE4 | User Manual - Page 43
1GB. Display Graphics Aperture Size is 2GB. • USB Function Disabled Disabled USB Function. Enabled Enabled USB Function. (Default Value) • USB KB Legacy Support Disabled Keyboard Keyb+Mouse Disable USB KB Legacy Support. (Default Value) Set USB KB Legacy Support to Keyboard. Set USB KB Legacy - Gigabyte GA-7IXE4 | User Manual - Page 44
BIOS Setup Power Management Setup AMIBIOS SETUP - POWER MANAGEMENT SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Power Management/APM Video Power Down Mode Hard Disk Power Down Mode Suspend Time Out (Minute) Display Activity IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ13 IRQ14 IRQ15 - Gigabyte GA-7IXE4 | User Manual - Page 45
7IXE4 Motherboard • Suspend Time Out (Minute) Disabled 1 2 4 8 10 20 30 40 50 60 Disabled Suspend Time Out Function. (Default Value) Enabled Suspend Time Out after 1min. Enabled Suspend Time Out after 2min. Enabled Suspend Time Out after 4min. Enabled Suspend Time Out after 8min. Enabled Suspend - Gigabyte GA-7IXE4 | User Manual - Page 46
BIOS Setup • PME Event Wake up Disabled Enabled Disabled PME Event Wake up function. (Default Value) Enabled PME Event Wake up function. • Resume by Alarm You can set "Resume by Alarm" item to Enabled and key in date/time to power on system. Disabled Enabled Disable this function. (Default - Gigabyte GA-7IXE4 | User Manual - Page 47
7IXE4 Motherboard PNP/PCI Configuration AMIBIOS SETUP - PNP / PCI CONFIGURATION ( C ) 1999 American Megatrends, Inc. All Rights Reserved PnP OS Installed Reset Configuration Data PCI Latency Timer VGA Boot from PCI VGA Palette Snoop DMA Channel 0 DMA Channel 1 DMA Channel 3 DMA Channel 5 DMA - Gigabyte GA-7IXE4 | User Manual - Page 48
BIOS Setup • PCI Latency Timer 32 Set PCI Latency Timer to 32. 64 Set PCI Latency Timer to 64. (Default value) 96 Set PCI Latency Timer to 96. 128 Set PCI Latency Timer to 128. 160 Set PCI Latency Timer to 160. 192 Set PCI Latency Timer to 192. 224 Set PCI Latency Timer to 224. 248 - Gigabyte GA-7IXE4 | User Manual - Page 49
7IXE4 Motherboard Load BIOS Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.22 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP - Gigabyte GA-7IXE4 | User Manual - Page 50
Load Setup Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.22 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER PASSWORD PNP/ - Gigabyte GA-7IXE4 | User Manual - Page 51
7IXE4 Motherboard Integrated Peripherals AMIBIOS SETUP - INTEGRATED PERIPHERALS ( C ) 1999 American Megatrends, Inc. All Rights Reserved OnBoard IDE OnBoard FDC OnBoard Serial Port A OnBoard Serial Port B Serial PortB Mode *IR Duplex Mode OnBoard Parallel Port Parallel Port Mode **Parallel Port - Gigabyte GA-7IXE4 | User Manual - Page 52
BIOS Setup • On Board Serial Port A Auto 3F8/COM1 2F8/COM2 3E8/COM3 2E8/COM4 Disabled BIOS will automatically setup the port A address. (Default Value) Enable on Board Serial port A and address is 3F8. Enable on Board Serial port A and address is 2F8. Enable on Board Serial port A and address is - Gigabyte GA-7IXE4 | User Manual - Page 53
7IXE4 Motherboard • Parallel Port Mode EPP ECP Normal Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. (Default Value) Normal Operation. • Parallel Port IRQ 7 Set Parallel Port IRQ is 7. 5 Set Parallel Port IRQ is 5. Auto Set Parallel Port - Gigabyte GA-7IXE4 | User Manual - Page 54
Hardware Monitor Setup BIOS Setup AMIBIOS SETUP - HARDWARE MONITOR SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Reset Case Open Status Case Opened Shut Down Temperature CPU Temperature Alarm Current CPU Temperature CPU Fan Fail Alarm Power Fan Fail Alarm System Fan Fail Alarm - Gigabyte GA-7IXE4 | User Manual - Page 55
7IXE4 Motherboard • Shut Down Temperature (°C / °F) (This function will be effective only for the operating systems that support ACPI Function.) Disabled 60°C / 140°F 70°C / 158°F 80°C / 176°F 90°C / 194°F Normal Operation. (Default value) Monitor CPU Temp. at 60°C / 140°F, if Temp. > 60°C / 140 - Gigabyte GA-7IXE4 | User Manual - Page 56
• Current System Temp. (°C / °F) Detect System Temp. automatically. • Current Vcore / Vcache / Vcc3 / ±12V / ±5V / Battery / +5V SB Detect system's voltage status automatically. BIOS Setup 50 - Gigabyte GA-7IXE4 | User Manual - Page 57
7IXE4 Motherboard Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.22 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP - Gigabyte GA-7IXE4 | User Manual - Page 58
IDE HDD Auto Detection BIOS Setup AMIBIOS SETUP - STANDARD CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Fri Dec 25, 1998 Time (hh/mm/ss) : 10:36:24 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Pri Master : Auto Pri Slave : Auto Sec Master: Auto Sec - Gigabyte GA-7IXE4 | User Manual - Page 59
7IXE4 Motherboard Save & Exit Setup AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.22 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER - Gigabyte GA-7IXE4 | User Manual - Page 60
Exit Without Saving BIOS Setup AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.22 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER - Gigabyte GA-7IXE4 | User Manual - Page 61
7IXE4 Motherboard Appendix Appendix A: AMD Chipset Driver Installation A. AMD EIDE Driver Insert the support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the - Gigabyte GA-7IXE4 | User Manual - Page 62
Appendix B. AMD AGP Miniport Driver Insert the support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the - Gigabyte GA-7IXE4 | User Manual - Page 63
7IXE4 Motherboard C. Gigabyte Utility Manager Ver.1.0 Driver Insert the support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the - Gigabyte GA-7IXE4 | User Manual - Page 64
Appendix (7) 0When the Gigabyte Utility Manager Ver.1.0 installation is completed, please restart your computer. (9) 6.Click "Finish". (8) 58 - Gigabyte GA-7IXE4 | User Manual - Page 65
7IXE4 Motherboard Appendix B: BIOS Flash Procedure BIOS update procedure: 9 Please check your BIOS vendor (AMI or AWARD) on the motherboard. 9 It is recommended you copy the AWDFlash.exe or AMIFlash.exe in driver CD (D:\>Utility\BIOSFlash) and the BIOS binary files into the directory you made in - Gigabyte GA-7IXE4 | User Manual - Page 66
Multi-Processing Universal Serial Bus Operating System Error Checking and Correcting Integrated Dual Channel Enhanced Special Circumstance Instructions Logical Block Addressing Electromagnetic Compatibility Basic Input / Output System System Management Interrupt Interrupt Request Network Interface - Gigabyte GA-7IXE4 | User Manual - Page 67
7IXE4 Motherboard Acor. PCI RIMM DRM ISA MTH CRIMM Meaning Peripheral Component Interconnect Rambus in-line Memory Module Dual Retention Mechanism Industry Standard Architecture Memory Translator Hub Continuity RIMM 61
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
 |
 |
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection
against
harmful
interference
in
residential
installations.
This
equipment
generates,
uses,
and
can
radiate
radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Model Number:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful
and
(2)
this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name:
ERIC LU
Signature:
Date:
Jul. 4, 2000
Eric Lu
GA-7IXE4