Gigabyte GA-7VAX-A User Manual - Page 8
Item Checklist
View all Gigabyte GA-7VAX-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English Item Checklist þ The KT400A Series motherboard þ IDE cable x 1/ Floppy cable x 1 þ IDE cable x 2 ** þ CD for motherboard driver & utility þ KT400A Series user's manual þ I/O Shield þ Motherboard Settings Label þ SATA cable x 2 * þ RAID Manual ** þ 2 Port USB Cable x 2 þ Audio combo Kit x1 ** þ IEEE 1394 Cable x1 *** o SPD Kit x1 þ Quick PC Installation Guide þ SATA RAID Manual * o GC-SATA Card * (Optional) (Manual ; SATAcable x1 ; Powercable x 1) Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. Ifyou do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Hold components by the edges and try not touch the IC chips, leads or connectors, or other com ponents. 4. Place components on a grounded antistatic pad or on the bag that came with the components whenever the components are separated from the system. 5. Ensure that the ATX power supply is switched off before you plug in or remove the ATX Power connector on the motherboard. Installing the motherboard to the chassis... If the motherboard has mounting holes, but they don't line up with the holes on the base and there are no slots to attach the spacers, do not become alarmed you can still attach the spacers to the mounting holes. Justcut the bottom portion ofthe spacers (the spacer may be a little hard to cut off, so be careful ofyour hands). In this way you can still attach the motherboard to the base withoutworrying about short circuits. Sometimes you may need to use the plastic springs to isolate the screw from the motherboard PCB surface, because the circuit wire may be near by the hole. Be careful, don't let the screw contactany printed circuitwrite or parts on the PCB thatare near the fixing hole, otherwise it may damage the board or cause board malfunctioning. " * " FOR GA-7VAXP-A Ultra Only. " ** " FOR GA-7VAXP-A Ultra / GA-7VAXP-A Only. " *** " For GA-7VAXP-A Ultra / GA-7VAXP-A / GA-7VAX1394-A Only. KT400A Series Motherboard - 4 -