Gigabyte GA-7VAX-A User Manual - Page 80
Copy Main ROM Data to Backup
View all Gigabyte GA-7VAX-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
English • Auto Recovery : Enable(Default), Disable When one o f the Main BIOS or Backup BIOS occurs ch ecksum failure, the working BIOS will automatically recover the BIOS of checksum failure. (In the Power Management Setup ofthe BIOS Setting, ifACPISuspend Type is set to Suspend to RAM, the Auto Recovery will be set to Enable automatically.) (Ifyou wantto enter the BIOSsetting, please press "Del"key when the bootscreen appears.) • Halt On Error : Disable(Default), Enable If the BIOS occu rs a checksum error or the Main BIOS occu rs a WIDE RANGE PROTECTION errorand HaltOn Error setto Enable,the PC will showmessages on the bootscreen, and the system willpause and waitfor the user's instruction. IfAuto Recovery :Disable, it will show IfAuto Recovery :Enable, itwill show • Keep DMI Data : Enable(Default), Disable Enable: The DMIdata won'tbe replaced byflashing newBIOS.(recommend) Disable: The DMI data will be replaced by flashing new BIOS. • Copy Main ROM Data to Backup (If you boot from Backup ROM, this item will change to "Copy Backup ROM Data to Main) Auto recovery message: BIOS Recovery: Main to Backup The means thatthe Main BIOS works normallyand could automatically recover the Backup BIO S. BIOS Recovery: Backup to Main The means thatthe Backup BIOSworks normally and could automaticallyrecover the Main BIOS. (This auto recovery utility is set by system automatically and can't be changed by user.) • Load Default Settings Load dual BIOS default value. • Save Settings to CMOS Save revised setting. KT400A Series Motherboard - 76 -