Gigabyte GA-7VT880 User Manual - Page 42

Onboard H/W LAN

Page 42 highlights

English AC97 Audio Auto Disabled Enable onboard AC'97 audio function. (Default value) Disable this function. USB 1.1 Controller Disable USB 1.1 host controller if you are not using USB devices. Enabled Enable USB 1.1 controller. (Default value) Disabled Disable USB 1.1 controller. USB 2.0 Controller Disable USB 2.0 host controller if you are not using high speed USB devices. Enabled Enable USB 2.0 controller. (Default value) Disabled Disable USB 2.0 controller. USB Keyboard Support Enabled Enable USB keyboard support. Disabled Disable USB keyboard support. (Default value) USB Mouse Support Enabled Enable USB mouse support. Disabled Disable USB mouse support. (Default value) Onboard H/W LAN(jk) Enabled Enable onboard LAN function. (Default value) Disabled Disable onboard LAN function. Onboard H/W 1394 Enabled Enable onboard IEEE1394 function. (Default value) Disabled Disable onboard IEEE1394 function. Onboard LAN Boot ROM(jk) This function decide whether to invoke the boot ROM of the onboard LAN chip. Enabled Enable this function. Disabled Disable this function. (Default value) Onboard Serial Port 1 Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8. 3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8. 2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8. Disabled Disable onboard Serial port 1. Onboard Serial Port 2 Auto BIOS will automatically setup the port 2 address. 3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8. 2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8. (Default value) 3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8. 2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8. Disabled Disable onboard Serial port 2. j Only for GA-7VT880 Pro. k Only for GA-7VT880-L. GA-7VT880 Serise Motherboard - 38 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

- 38 -
GA-7VT880 Serise Motherboard
English
j
Only for GA-7VT880 Pro.
k
Only for GA-7VT880-L.
AC97 Audio
Auto
Enable onboard AC'97 audio function. (Default value)
Disabled
Disable this function.
USB 1.1 Controller
Disable USB 1.1 host controller if you are not using USB devices.
Enabled
Enable USB 1.1 controller. (Default value)
Disabled
Disable USB 1.1 controller.
USB 2.0 Controller
Disable USB 2.0 host controller if you are not using high speed USB devices.
Enabled
Enable USB 2.0 controller. (Default value)
Disabled
Disable USB 2.0 controller.
USB Keyboard Support
Enabled
Enable USB keyboard support.
Disabled
Disable USB keyboard support. (Default value)
USB Mouse Support
Enabled
Enable USB mouse support.
Disabled
Disable USB mouse support. (Default value)
Onboard H/W LAN(
jk
)
Enabled
Enable onboard LAN function. (Default value)
Disabled
Disable onboard LAN function.
Onboard H/W 1394
Enabled
Enable onboard IEEE1394 function. (Default value)
Disabled
Disable onboard IEEE1394 function.
Onboard LAN Boot ROM(
jk
)
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled
Enable this function.
Disabled
Disable this function. (Default value)
Onboard Serial Port 1
Auto
BIOS will automatically setup the port 1 address.
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8.
Disabled
Disable onboard Serial port 1.
Onboard Serial Port 2
Auto
BIOS will automatically setup the port 2 address.
3F8/IRQ4
Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3
Enable onboard Serial port 2 and address is 2F8. (Default value)
3E8/IRQ4
Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3
Enable onboard Serial port 2 and address is 2E8.
Disabled
Disable onboard Serial port 2.