Gigabyte GA-7VT880 User Manual - Page 47
RET to ACT/REF to REFTrfc
View all Gigabyte GA-7VT880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
English MB Intelligent Tweaker (M.I.T) Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2004 Award Software MB Intelligent Tweaker (M.I.T) DRAM Timing x DRAM CAS Latency x Bank Interleave x Precharge to Active (Trp) x Active to Precharge (Tras) x Active to CMD (Trcd) x RET to ACT/REF to REF (Trfc) x ACT(0) to ACT(1) (Trrd) CPU Ratio Control Spread Spectrum Modulated CPU Host Clock Control x CPU Host Frequency (MHz) PCI / AGP Frequency (MHz) DRAM Clock CPU Voltage Control Normal CPU Vcore AGP Voltage Control DDR Voltage Control [Auto By SPD] 2.5 4 Bank 3T 6T 3T 12T 2T [Normal] [Enabled] [Disabled] 133 33/66 [By SPD] [Normal] 1.600V [Auto] [Auto] Item Help Menu Level} higf: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save ESC: Exit F6: Fail-Safe Defaults F7: Optimized Defaults F1: General Help Incorrect using these features may cause your system broken. For power End-User use only! DRAM Timing Auto By SPD Manual BIOS will automatically setup the DRAM Timing by DRAM SPD data. (Default value) This item allows user to set DRAM Timing Manually. DRAM CAS Latency 1.5/2/2.5/3 Set DRAM CAS Latency time to 1.5/2/2.5/3(Default value:2.5). Bank Interleave This feature allows user to select the DRAM access method. 4Bank /2Bank /Disabled Set DRAM access method to 4Bank/2Bank/Disanled(Default value:4Bank) Precharge to Active(Trp) 2T/3T/4T/5T Set Precharge to Active(Trp) to 2T/3T/4T/5T(Default value:3T) Active to Precharge(Tras) 6T/7T/8T/9T Set Active to Precharge(Tras) to 6T/7T/8T/9T(Default value:6T) Active to CMD(Trcd) 2T/3T/4T/5T Set Active to CMD(Trcd) to 2T/3T/4T/5T(Default value:3T) RET to ACT/REF to REF(Trfc) 12T/13T/14T/15T Set RET to ACT/REF to REF(Trfc) to 12T/13T/14T/15T(Default Value:12T) ACT(0) to ACT(1) (Trrd) This feature allows user to select the ACT(0) to ACT(1) (Trrd), when any DRAM DIMM installed. 2T/3T Set ACT(0) to ACT(1) (Trrd) to 2T/3T(Default Value:2T) CPU Ratio Control This option will not be shown or not be available if you are using a CPU with the locked ratio. 5X~22.5X,Normal It depends on CPU Clock Ratio.(Default Value:Normal) - 43 - BIOS Setup