Home » Gigabyte Manuals » Motherboards » Gigabyte GA-880GA-UD3H » Manual Viewer

Gigabyte GA-880GA-UD3H Manual - Page 26

IDE IDE Connector, SATA3_0/1/2/3/4/5 SATA 6Gb/s Connectors, Controlled by AMD SB850, supports RAID 0

UPC - 818313010353

View all Gigabyte GA-880GA-UD3H manuals

Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

7) IDE (IDE Connector) The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attaching the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE devices, remember to set the jumpers and the cabling according to the role of the IDE devices (for example, master or slave). (For information about configuring master/slave settings for the IDE devices, read the instructions from the device manufacturers.) 40 39 2 1 8) SATA3_0/1/2/3/4/5 (SATA 6Gb/s Connectors, Controlled by AMD SB850) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standards. Each SATA connector supports a single SATA device. The AMD SB850 controller supports RAID 0, RAID 1, RAID 5, RAID 10, and JBOD. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array. G.QBOFM G.QBOFM G.QBOFM Pin No. Definition SATA3_0 7 7 SATA3_1 SATA3_2 SATA3_3 1 SATA3_4 2 1 3 14 SATA3_5 5 GND TXP TXN GND RXN 6 RXP 7 GND EBUG ORT DEBUG PORT Please connect the L-shaped end of the SATA cable to your SATA hard drive. • A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives are to be used, the total number of hard drives must be an even number. • A RAID 5 configuration requires at least three hard drives. (The total number of hard drives does not have to be an even number.) • A RAID 10 configuration requires four hard drives. Hardware Installation - 26 -

Section	Page
Box Contents	6
Optional Items	6
GA-880GA-UD3H Motherboard Layout	7
GA-880GA-UD3H Motherboard Block Diagram	8
Chapter 1 Hardware Installation	9
1-1 Installation Precautions	9
1-2 Product Specifications	10
1-3 Installing the CPU and CPU Cooler	13
1-3-1 Installing the CPU	13
1-3-2 Installing the CPU Cooler	15
1-4 Installing the Memory	16
1-4-1 Dual Channel Memory Configuration	16
1-4-2 Installing a Memory	17
1-5 Installing an Expansion Card	18
1-6 Setup of the ATI Hybrid CrossFireX™ Configuration	19
1-7 Back Panel Connectors	20
1-8 Internal Connectors	23
Chapter 2 BIOS Setup	33
2-1 Startup Screen	34
2-2 The Main Menu	35
2-3 MB Intelligent Tweaker(M.I.T.)	37
2-4 Standard CMOS Features	44
2-5 Advanced BIOS Features	46
2-6 Integrated Peripherals	48
2-7 Power Management Setup	51
2-8 PnP/PCI Configurations	53
2-9 PC Health Status	54
2-10 Load Fail-Safe Defaults	56
2-11 Load Optimized Defaults	56
2-12 Set Supervisor/User Password	57
2-13 Save & Exit Setup	58
2-14 Exit Without Saving	58
Chapter 3 Drivers Installation	59
3-1 Installing Chipset Drivers	59
3-2 Application Software	60
3-3 Technical Manuals	60
3-4 Contact	61
3-5 System	61
3-6 Download Center	62
3-7 New Utilities	62
Chapter 4 Unique Features	63
4-1 Xpress Recovery2	63
4-2 BIOS Update Utilities	66
4-2-1 Updating the BIOS with the Q-Flash Utility	66
4-2-2 Updating the BIOS with the @BIOS Utility	69
4-3 EasyTune 6	70
4-4 Easy Energy Saver	71
4-5 Q-Share	73
4-6 SMART Recovery	74
4-7 Auto Green	75
4-8 Cloud OC	76
Chapter 5 Appendix	77
5-1 Configuring SATA Hard Drive(s)	77
5-1-1 Configuring AMD SB850 SATA Controller	77
5-1-2 Configuring GIGABYTE SATA2 SATA Controller	83
5-1-3 Making a SATA RAID/AHCI Driver Diskette	89
5-1-4 Installing the SATA RAID/AHCI Driver and Operating System	91
5-2 Configuring Audio Input and Output	100
5-2-1 Configuring 2/4/5.1/7.1-Channel Audio	100
5-2-2 Configuring S/PDIF In/Out	102
5-2-3 Enabling the Dolby Home Theater Function	104
5-2-4 Configuring Microphone Recording	105
5-2-5 Using the Sound Recorder	107
5-3 Troubleshooting	108
5-3-1 Frequently Asked Questions	108

Match case Limit results 1 per page

Hardware Installation

- 26 -

IDE (IDE Connector)

The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attach-

ing the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE devices,

remember to set the jumpers and the cabling according to the role of the IDE devices (for example,

master or slave). (For information about conﬁguring master/slave settings for the IDE devices, read the

instructions from the device manufacturers.)

SATA3_0/1/2/3/4/5 (SATA 6Gb/s Connectors, Controlled by AMD SB850)

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA

1.5Gb/s standards. Each SATA connector supports a single SATA device. The AMD SB850 controller

supports RAID 0, RAID 1, RAID 5, RAID 10, and JBOD. Refer to Chapter 5, "Conﬁguring SATA Hard

Drive(s)," for instructions on conﬁguring a RAID array.

Pin No.

Deﬁnition

GND

TXP

TXN

GND

RXN

RXP

GND

•

A RAID 0 or RAID 1 conﬁguration requires at least two hard drives. If more than two hard

drives are to be used, the total number of hard drives must be an even number.

•

A RAID 5 conﬁguration requires at least three hard drives. (The total number of hard drives

does not have to be an even number.)

•

A RAID 10 conﬁguration requires four hard drives.

SATA3_5

SATA3_3

SATA3_1

SATA3_4

SATA3_2

SATA3_0

Please connect the L-shaped end of

the SATA cable to your SATA hard

drive.