Gigabyte GA-880GM-UD2H Manual - Page 10

Product Specifications, Support for SATA RAID 0, RAID 1, and JBOD - 880g

Page 10 highlights

1-2 Product Specifications CPU Support for AM3 processors: AMD Phenom™ II processor/ AMD Athlon™ II processor (Go to GIGABYTE's website for the latest CPU support list.) Hyper Transport Bus 5200 MT/s Chipset   Memory Onboard Graphics  Audio       North Bridge: AMD 880G South Bridge: AMD SB710 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1) Dual channel memory architecture Support for DDR3 1800(O.C.)/1333/1066 MHz memory modules (Note 2) (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Integrated in the North Bridge: - 1 x D-Sub port - 1 x DVI-D port (Note 3) (Note 4) - 1 x HDMI port (Note 4) Realtek ALC892 codec High Definition Audio 2/4/5.1/7.1-channel Support for Dolby® Home Theaterj Support for S/PDIF In/Out Support for CD In LAN  1 x Realtek RTL8111D chip (10/100/1000 Mbit) Expansion Slots  1 x PCI Express x16 slot, running at x16  1 x PCI Express x1 slot (All PCI Express slots conform to the PCI Express 2.0 standard 2 x PCI slots Multi-Graphics  Support for ATI Hybrid CrossFireX™ technology Technology Storage Interface  South Bridge: - 5 x SATA 3Gb/s connectors supporting up to 5 SATA 3Gb/s devices - 1 x eSATA 3Gb/s connector on the back panel supporting up to 1 SATA 3Gb/s device - Support for SATA RAID 0, RAID 1, RAID 10, and JBOD - 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices  iTE IT8720 chip: - 1 x floppy disk drive connector supporting up to 1 floppy disk drive "*" The GA-880GM-UD2H adopts All-Solid Capacitor design. j Only for GA-880GM-UD2H Hardware Installation - 10 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

Hardware Installation
- 10 -
1-2
Product Specifications
CPU
Support for AM3 processors:
AMD Phenom
II processor/ AMD Athlon
II processor
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport Bus
5200 MT/s
Chipset
North Bridge: AMD 880G
South Bridge: AMD SB710
Memory
4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
(Note 1)
Dual channel memory architecture
Support for DDR3 1800(O.C.)/1333/1066 MHz memory modules
(Note 2)
(Go to GIGABYTE's website for the latest supported memory speeds and
memory modules.)
Onboard Graphics
Integrated in the North Bridge:
- 1 x D-Sub port
- 1 x DVI-D port
(Note 3) (Note 4)
- 1 x HDMI port
(Note 4)
Audio
Realtek ALC892 codec
High Definition Audio
2/4/5.1/7.1-channel
Support for Dolby
®
Home Theater
j
Support for S/PDIF In/Out
Support for CD In
LAN
1 x Realtek RTL8111D chip (10/100/1000 Mbit)
Expansion Slots
1 x PCI Express x16 slot, running at x16
1 x PCI Express x1 slot
(All PCI Express slots conform to the PCI Express 2.0 standard.)
2 x PCI slots
Multi-Graphics
Support for ATI Hybrid CrossFireX
technology
Technology
Storage Interface
South Bridge:
-
5 x SATA 3Gb/s connectors supporting up to 5 SATA 3Gb/s devices
-
1 x eSATA 3Gb/s connector on the back panel supporting up to 1 SATA 3Gb/s
device
-
Support for SATA RAID 0, RAID 1, RAID 10, and JBOD
-
1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
iTE IT8720 chip:
-
1 x floppy disk drive connector supporting up to 1 floppy disk drive
j
Only for GA-880GM-UD2H
"*"
The GA-880GM-UD2H adopts All-Solid Capacitor design.