Gigabyte GA-8SIMLH User Manual - Page 13
Step 1: Install the Central Processing Unit CPU
View all Gigabyte GA-8SIMLH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English Step 1: Install the Central Processing Unit (CPU) Step1-1 : CPU Installation Angling the rod to 650 Socket Actuation Lever 1. Angling the rod to 65-degree maybe feel a kind of tight, andthen continue pull the rod to 90-degree when a noise "cough" made. 2. Pull the rod to the 90-degree directly. Pin1 indicator Pin1 indicator 3. CPU Top View 4. Locate Pin 1 in the socket and look for a (golden) cut edge on the CPU upper corner. Then insert the CPU into the socket. M Please make sure the CPU type is supported by the motherboard. M If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause improper installation. Please change the insert orientation. - 9 - Hardw are Installation Process
- 9 -
Hardw are Installation Process
English
Step 1: Install the Central Processing Unit (CPU)
Step1-1 : CPU Installation
M
Please make sure the CPU type is supported by the motherboard.
M
If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause
improper installation. Please change the insert orientation.
Pin1 indicator
3. CPU Top View
2.
Pull the rod to the 90-degree directly .
1. Angling the rod to 65-degree may be feel
a kind of tight, and then continue pull the
rod to 90-degree w hen a noise “cough”
made.
4.
Locate Pin 1 in the socket and look
for a (golden) cut edge on the C PU
upper corner. Then insert the C PU
into the socket.
Angling the
rod to 65
0
Socket
Actuation
Lever
Pin1 indicator