Gigabyte GA-970A-D3 Manual - Page 10
Product Specifications, Support for DDR3 2000O.C./1866/1600/1333/1066 MHz memory modules - am3
View all Gigabyte GA-970A-D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1-2 Product Specifications CPU AM3+ Socket: - AMD AM3+ FX processors - AMD AM3 Phenom™ II processor/ AMD Athlon™ II processor (Go to GIGABYTE's website for the latest CPU support list.) Hyper Transport Bus 5200 MT/s Chipset North Bridge: AMD 970 South Bridge: AMD SB950 Memory 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. Dual channel memory architecture Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules * To support a DDR3 1866 MHz (and above) memory, you must install an AM3+ CPU first. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Audio Realtek ALC889 codec High Definition Audio 2/4/5.1/7.1-channel Support for S/PDIF Out LAN 1 x Realtek RTL8111E chip (10/100/1000 Mbit) Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. 1 x PCI Express x16 slot, running at x4 (PCIEX4) 3 x PCI Express x1 slots (All PCI Express slots conform to the PCI Express 2.0 standard.) 2 x PCI slots Storage Interface South Bridge: - 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices - Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD USB South Bridge: - Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers) Etron EJ168 chip: - Up to 2 USB 3.0/2.0 ports on the back panel Hardware Installation - 10 -