Gigabyte GA-A55M-DS2 User Manual - Page 23
IGX Configuration, UMA Frame Buffer Size, VGA Core ClockMHz - overclocking
View all Gigabyte GA-A55M-DS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2-3 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2011 Award Software MB Intelligent Tweaker(M.I.T.) } IGX Configuration CPU Clock Ratio Core Performance Boost (Note) CPB Ratio (Note) CPU Host Clock Control x CPU Host Clock PCIe Spread Spectrum Set Memory Clock x Memory Clock } DRAM Configuration ******** System Voltage Optimized ******** System Voltage Control x DDR3 Voltage Control x FCH Voltage Control x APU VDDP Voltage Control x CPU VCORE NB Control x CPU VCORE Control Normal CPU Vcore [Press Enter] [Auto] 2400Mhz [Enabled] [Auto] 2400Mhz [Auto] 100 [Disabled] [Auto] x6.66 1333Mhz [Press Enter] [Auto] Auto Auto Auto Auto Auto 1.3875V Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults • Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) • When the System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings. IGX Configuration CMOS Setup Utility-Copyright (C) 1984-2011 Award Software IGX Configuration UMA Frame Buffer Size VGA Core Clock control x VGA Core Clock(MHz) [Auto] [Auto] 600 Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults UMA Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 256MB, 512MB, 1024MB. VGA Core Clock control Allows you to determine whether to manually set the VGA Core clock. (Default: Auto) VGA Core Clock(MHz) Allows you to manually set the VGA Core clock. The adjustable range is from 300 MHz to 2000 MHz. This item is configurable only if the VGA Core Clock control option is set to Manual. (Note) This item is present only when you install a CPU that supports this feature. - 23 -