Gigabyte GA-EX38-DS4 Manual - Page 2
Teaming needs to set three parts, select adapters at least two adpaters, select teaming mode
 |
View all Gigabyte GA-EX38-DS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
(iii) Teaming needs to set three parts 1. select adapters (at least two adpaters) 2. select teaming mode There are three teaming modes for user choosing. (Default = 802.3ad) (1) General Switch Mode This mode is supported to general switch (without teaming function swtich). (2) FEC/GEC The mode needs the switch supports FEC/GEC. So, the switch has to setup FEC/GEC mode and which ports are using for teaming. (3) Link Aggregation \ LACP (802.3ad) The mode needs switch support LACP. LACP is similar with FEC/GEC. But LACP doesn't setup which ports are using for teaming. LACP negotiates the ports with the switch that will make up the team.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9
-
10
-
11
-
12
-
13
 |
 |
(iii)
Teaming needs to set three parts
1.
select adapters (at least two adpaters)
2.
select teaming mode
There are three teaming modes for user choosing. (Default = 802.3ad)
(1)
General Switch Mode
This mode is supported to general switch (without teaming function swtich).
(2)
FEC/GEC
The mode needs the switch supports FEC/GEC. So, the switch has to setup
FEC/GEC mode and which ports are using for teaming.
(3)
Link Aggregation \ LACP (802.3ad)
The mode needs switch support LACP. LACP is similar with FEC/GEC. But LACP
doesn’t setup which ports are using for teaming. LACP negotiates the ports with the
switch that will make up the team.