Gigabyte GA-K8NF-9 User Manual - Page 26
Clr_cmos Clear Cmos, Ir_cir
View all Gigabyte GA-K8NF-9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English 14) IR_CIR Make sure the pin 1 on the IR device is align with pin one the connector. To enable the IR/CIR function, you are required to purchase an optional IR/CIR module. To use IR function only, please connect IR module to Pin1 to Pin5. Be careful with the polarity of the IR/CIR connector. Check the pin assignment carefully while you connect the IR/CIR cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional IR/CIR cable, please contact your local dealer. 6 10 1 5 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition Power NC IRRX GND IRTX NC CIRRX +5VSB CIRTX NC 15) CLR_CMOS (Clear CMOS) You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper. Open: Normal 1 Short: Clear CMOS 1 GA-K8NF-9 Motherboard - 26 -