Gigabyte GA-K8NF-9 User Manual - Page 41
Current VoltageV Vcore / DDR25V / +3.3V / +12V - cpu support
View all Gigabyte GA-K8NF-9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
English 2-6 PC Health Status CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PC Health Status Vcore DDR25V +3.3V +12V Current CPU Temperature Current CPU FAN Speed Current SYSTEM FAN Speed CPU Warning Temperature CPU FAN Fail Warning CPU Smart FAN Control (Note) CPU FAN Manual Control x CPU FAN: Low speed x CPU FAN: Mid speed x CPU FAN: High speed x Temp of FAN turn off x Temp Limit of Low Speed x Temp Limit of Mid Speed x Temp Limit of High Speed x Temp of full FAN speed OK OK OK OK 38oC 1985 RPM 0 RPM [Disabled] [Disabled] [Disabled] [Disabled] 8 12 80 0 20 50 60 70 Item Help Menu Level` [Disabled] Don't monitor current temperature [60oC-90oC] Alarm when current temperature over than the selected temperature KLJI: Move Enter: Select +/-/PU/PD: Value F5: Previous Values F10: Save ESC: Exit F7: Optimized Defaults F1: General Help Current Voltage(V) Vcore / DDR25V / +3.3V / +12V Detect system's voltage status automatically. Current CPU Temperature Detect CPU temperature automatically. Current CPU/SYSTEM FAN Speed (RPM) Detect CPU/SYSTEM fan speed status automatically. CPU Warning Temperature 60oC / 140oF Monitor CPU temperature at 60oC / 140oF. 70oC / 158oF Monitor CPU temperature at 70oC / 158oF. 80oC / 176oF Monitor CPU temperature at 80oC / 176oF. 90oC / 194oF Monitor CPU temperature at 90oC / 194oF. Disabled Disable this function. (Default value) CPU FAN Fail Warning Disabled Disable CPU fan fail warning function. (Default value) Enabled Enable CPU fan fail warning function. CPU Smart FAN Control (Note) Disabled Disable this function. (Default value) Enabled When this function is enabled, CPU fan will run at different speed depending on CPU temperature. Users can adjust the fan speed with Easy Tune based on their requirements. (Note) The CPU fan runs at full speed when both CPU Smart FAN Control and CPU FAN Manual Control are disabled. Whether the CPU Smart FAN Control function is supported will depend on the CPU you install. For more detailed information please check at the FAQ section on GIGABYTE's website. - 41 - BIOS Setup