Gigabyte GA-M55S-S3 Manual - Page 37

English NV SATA 2 Secondary RAID Enabled Enable RAID function for the second channel of the second SATA controller. (Default value) Disabled Disable the RAID function of this channel. It will operate in ATA mode. On-Chip IDE Channel0 Enabled Enable onboard first channel IDE port. (Default value) Disabled Disable onboard first channel IDE port. On-Chip MAC Lan Disabled Auto Disable the Lan controller built-in core chipset. Enable the Lan controller built-in core chipset. (Default value) NV Serial-ATA Controller Disabled SATA-1 All Enabled Disable the 2 SATA controllers. Enable the first SATA controller only. Enable the 2 SATA controllers. (Default value) IDE Prefetch Mode Enabled Enable IDE data buffer to enhance HDD transfer speed. (Default value) Disabled Disable IDE data buffer for the system stability. Onboard Audio Function Auto Auto-detect onboard audio function. (Default value) Disabled Disable this function. SMART LAN CMOS Setup Utility-Copyright (C) 1984-2006 Award Software SMART LAN Start detecting at Port..... Pair1-2 Status = Normal / Pair3-6 Status = Normal / Pair4-5 Status = Normal / Pair7-8 Status = Normal / Length = Length = Length = Length = Item Help N/A Menu Level N/A N/A N/A : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN cable. This feature will detect cabling issue and report the approximate distance to the fault or short. Refer to the following information for diagnosing your LAN cable: - 37 - BIOS Setup