Gigabyte GA-M61VME-S2 Manual - Page 37

English NV SATA RAID function Enabled Enable NV SATA RAID function. Disabled Disable NV SATA RAID function. (Default value) NV SATA 1 Primary RAID Enabled Enable NV SATA 1 primary RAID function. Disabled Disable this function. (Default value) NV SATA 1 Secondary RAID Enabled Disabled Enable NV SATA 1 secondary RAID function. Disable this function. (Default value) On-Chip IDE Channel0 Enabled Disabled Enable onboard 1st channel IDE port. (Default value) Disable onboard 1st channel IDE port. On-Chip MAC Lan Auto Auto-detect onboard LAN chip function. (Default value) Disabled Disable onboard LAN chip function. NV Serial-ATA 1 Enabled Enable NV Serial-ATA 1 function. (Default value) Disabled Disable this function. IDE Prefetch Mode Enabled Enable IDE data buffer to enhance HDD transfer speed. (Default value) Disabled Disable IDE data buffer for the system stability. USB Memory Type SHADOW Set USB memory type to SHADOW. (Default value) Base Memory(640K) Set USB memory type to base memory(640 K). Onboard Audio Function Auto Auto-detect onboard audio function. (Default value) Disabled Disable this function. Onboard LAN Boot ROM This function decide whether to invoke the boot ROM of the onboard LAN chip. Enabled Enable this function. Disabled Disable this function. (Default value) Onboard Serial Port 1 Auto BIOS will automatically setup the Serial port 1 address. 3F8/IRQ4 2F8/IRQ3 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value) Enable onboard Serial port 1 and address is 2F8/IRQ3. 3E8/IRQ4 2E8/IRQ3 Enable onboard Serial port 1 and address is 3E8/IRQ4. Enable onboard Serial port 1 and address is 2E8/IRQ3. Disabled Disable onboard Serial port 1. - 37 - BIOS Setup