Gigabyte GA-MA785GM-US2H Manual - Page 10

1-2 Product Specifications CPU Support for AM3/AM2+/AM2 processors: AMD Phenom™ II processor/ AMD Phenom™ processor/ AMD Athlon™ II processor/ AMD Athlon™ processor/ AMD Sempron™ processor (Go to GIGABYTE's website for the latest CPU support list.) Hyper Transport Bus 5200/2000 MT/s Chipset   Memory Onboard Graphics  Audio       North Bridge: AMD 785G South Bridge: AMD SB710 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory (Note 1) Dual channel memory architecture Support for DDR2 1200(O.C.)/1066 (Note 2)/800 MHz memory modules (Go to GIGABYTE's website for the latest memory support list.) Integrated in the North Bridge: - 1 x D-Sub port - 1 x DVI-D port (Note 3) (Note 4) - 1 x HDMI port (Note 4) Realtek ALC889A codec High Definition Audio 2/4/5.1/7.1-channel Support for Dolby® Home Theater jk Support for S/PDIF In/Out Support for CD In LAN  RTL8111C chip (10/100/1000 Mbit) Expansion Slots  1 x PCI Express x16 slot, running at x16 (The PCI Express x16 slot conforms to PCI Express 2.0 standard 1 x PCI Express x1 slot 2 x PCI slots Storage Interface  South Bridge: - 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices - 5 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4) supporting up to 5 SATA 3Gb/s devices - 1 x eSATA 3Gb/s port on the back panel supporting up to 1 SATA 3Gb/s device - Support for SATA RAID 0, RAID 1, RAID 10, and JBOD  iTE IT8718 chip: - 1 x floppy disk drive connector supporting up to 1 floppy disk drive "*" j k The GA-MA785GPM-UD2H/GA-MA785GM-UD2H adopts All-Solid Capacitor design. Only for GA-MA785GPM-UD2H. Only for GA-MA785GM-UD2H. Hardware Installation - 10 -