Gigabyte GA-MA785GM-US2H Manual - Page 39

2-3 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2009 Award Software MB Intelligent Tweaker(M.I.T.) } Advanced Clock Calibration (Note) HT Link Frequency CPU Clock Ratio CPU NorthBridge Freq. (Note) CPU Host Clock Control x CPU Frequency(MHz) PCIE Clock(MHz) VGA Core Clock control x VGA Core Clock(MHz) Set Memory Clock x Memory Clock DCTs Mode (Note) } DRAM Configuration ******** System Voltage Optimized ******** System Voltage Control DDR2 Voltage Control NorthBridge Volt Control SouthBridge Volt Control SidePort Mem Volt Control [Press Enter] [Auto] [Auto] [Auto] [Auto] 200 [Auto] [Disabled] 500 [Auto] x4.00 800Mhz [Unganged] [Press Enter] [Manual] [Normal] [Normal] [Normal] [Normal] Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2009 Award Software MB Intelligent Tweaker(M.I.T.) CPU NB VID Control (Note) CPU Voltage Control Normal CPU Vcore [Normal] [Normal] 1.3250V Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults • Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) • When the System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings. (Note) This item appears only if you install a CPU that supports this feature. - 39 - BIOS Setup