Gigabyte GA-Q87M-MK User Manual - Page 8
Support for RAID 0, RAID 1, and RAID 10, PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
View all Gigabyte GA-Q87M-MK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Storage Interface USB Internal Connectors Back Panel Connectors Chipset: - 6 x SATA 6Gb/s connectors (SATA3 0~SATA3 5) * The SATA3 5 connector will become unavailable when the mSATA connector is installed with a solid state drive. - Support for RAID 0, RAID 1, RAID 5, and RAID 10 Chipset: - 6 USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through the internal USB header) - 6 USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) 1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 6 x SATA 6Gb/s connectors 1 x mSATA connector * Mini PCIe and mSATA interfaces share the same connector. 1 x CPU fan header 1 x system fan header 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x USB 3.0/2.0 header 2 x USB 2.0/1.1 headers 2 x serial port headers 1 x parallel port header 1 x debug card header 1 x Clear CMOS jumper 1 x PS/2 keyboard/mouse port 1 x DVI-I port 1 x DVI-D port 1 x optical S/PDIF Out connector 1 x HDMI port 1 x DisplayPort 4 x USB 3.0/2.0 ports 2 x USB 2.0/1.1 ports 2 x RJ-45 ports 3 x audio jacks (Line In, Line Out, Mic In) I/O Controller iTE® I/O Controller Chip Hardware Monitor BIOS System voltage detection CPU/System temperature detection CPU/System fan speed detection CPU/System overheating warning CPU/System fan fail warning CPU/System fan speed control * Whether the fan speed control function is supported will depend on the cooler you install. 1 x 64 Mbit flash Use of licensed AMI EFI BIOS PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a - 8 -