Gigabyte GA-Z270-Phoenix Gaming Users Manual - Page 31
Peripherals, Initial Display Output, EZ RAID, LED_C Connect, RGB Fusion
View all Gigabyte GA-Z270-Phoenix Gaming manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2-5 Peripherals && Initial Display Output Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics. IGFX Sets the onboard graphics as the first display. PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the first display. (Default) PCIe 2 Slot Sets the graphics card on the PCIEX4_1 slot as the first display. PCIe 3 Slot Sets the graphics card on the PCIEX4_2 slot as the first display. && EZ RAID Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. && LED_C Connect Enables or disables the lights of the RGB (RGBW) LED strip connected to the LED_C header on the motherboard. (Default: Enabled) && RGB Fusion Allows you to set the LED lighting mode for the motherboard. Off Disables this function. Pulse Mode All LEDs simultaneously fade in and fade out. Color Cycle All LEDs simultaneously cycle through a full spectrum of colors. Static Mode All LEDs emit a single color. (Default) Flash Mode All LEDs simultaneously flash on and off. && Intel Platform Trust Technology (PTT) Enables or disables Intel® PTT Technology. (Default: Disabled) - 31 -