Gigabyte GA-Z68AP-D3 Manual - Page 11
x audio jacks Line In/Line Out/Microphone, Support for RAID 0, RAID 1, and RAID 10 - msata
View all Gigabyte GA-Z68AP-D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Storage Interface Chipset: - 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices - 4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA 3Gb/s devices * The SATA2_5 connector will become unavailable when the mSATA connector is installed with a solid state drive. - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. USB Chipset: - Up to 10 USB 2.0/1.1 ports (4 ports on the back panel, 6 ports available through the internal USB headers) Etron EJ168 chip: - Up to 2 USB 3.0/2.0 ports on the back panel Internal 1 x 24-pin ATX main power connector Connectors 1 x 4-pin ATX 12V power connector 2 x SATA 6Gb/s connectors 4 x SATA 3Gb/s connectors 1 x mSATA connector 1 x CPU fan header 2 x system fan headers 1 x power fan header 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 3 x USB 2.0/1.1 headers 1 x clearing CMOS jumper 1 x Trusted Platform Module (TPM) header Back Panel 1 x PS/2 keyboard/mouse port Connectors 1 x parallel port 1 x serial port 1 x optical S/PDIF Out connector 1 x HDMI port 4 x USB 2.0/1.1 ports 2 x USB 3.0/2.0 ports 1 x RJ-45 port 3 x audio jacks (Line In/Line Out/Microphone) I/O Controller iTE IT8728 chip - 11 - Hardware Installation