Gigabyte GN-WP01GS User Manual - Page 19
Domain name must end in specified name, Advanced Screen, Advanced, Wireless Mode, Ad Hoc Wireless - review
View all Gigabyte GN-WP01GS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Domain name must end in specified name: If this option is selected, the certificate issuer must be the domain or secondary domain entered in "Server Name". 3-1-3. Advanced Screen The Advanced screen includes fields of various parameters to review or change drivers. Just click OK to apply any changes in parameters in the tab. A reboot is not needed for changes to take effect. (see Figure 20) Figure 20. Advanced Screen Description of items in Figure 20 is as follows: Wireless Mode: Sets infrastructure Protocols, including 802.11 B/G mix and 802.11 B Only. (Default: 802.11 B/G mix) Ad Hoc Wireless Mode: Sets Ad Hoc Wireless Protocols, including 802.11 B/G mix, 802.11 B Only and 802.11 G Only. (Default: 802.11 B/G mix) TX Burst: The longest interval between frames is normally one DIFS while frames are transmitted. When this setting is open, the longest interval between frames is one SIFS that means the system is allowed to transmit higher capacity of data in one interval. (Default: OFF) B/G Protection: 802.11b uses CCK modulation. 802.11g uses OFDM while CCK modulation for 802.11b is compatible. To prevent data collision between two stations with 802.11b and 802.11g within range of the same Access Point, it is necessary to set 11B/G Protection. This setting only functions when 802.11 B/G mix is selected as Wireless Mode. Three setting are available: AUTO, ENABLE and DISABLE. This is a mechanism implemented to prevent the "Hidden Node" problem, "Hidden Node" is a situation in which two stations are within range of the same Access Point, but are not within range of each other. Therefore, they are hidden nodes for each other and can not detect each other. This mechanism is a way to prevent data collision when WLAN equipments require transmission. 16