Gigabyte H470M DS3H User Manual - Page 33

NVMe Configuration, SATA And RST Configuration, Configured as eSATA, LEDs in System Power On State

Get Gigabyte H470M DS3H PDF manuals and user guides View all Gigabyte H470M DS3H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

&& IPv6 PXE Support Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled. && IPv6 HTTP Support Enables or disables HTTP boot support for IPv6. This item is configurable only when Network Stack is enabled. && PXE boot wait time Allows you to configure how long to wait before you can press to abort the PXE boot. This item is configurable only when Network Stack is enabled. (Default: 0) && Media detect count Allows you to set the number of times to check the presence of media. This item is configurable only when Network Stack is enabled. (Default: 1) ƒƒ NVMe Configuration Displays information on your M.2 NVME PCIe SSD if installed. ƒƒ SATA And RST Configuration && SATA Controller(s) Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Intel RST Premium With Intel Optane System Acceleration Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset SATA controllers. (Default: Disabled) && Port 0/1/2/3/4/5 Enables or disables each SATA port. (Default: Enabled) && Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && Configured as eSATA Enables or disables support for external SATA devices. ƒƒ EZ RAID Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. ƒƒ Intel(R) Ethernet Connection This sub-menu provides information on LAN configuration and related configuration options. ƒƒ Miscellaneous && LEDs in System Power On State Allows you to enable or disable motherboard LED lighting when the system is on. Off Disables the selected lighting mode when the system is on. On Enables the selected lighting mode when the system is on. (Default) - 33 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
&
IPv6 PXE Support
Enables or disables IPv6 PXE Support. This item is configurable only when
Network Stack
is enabled.
&
IPv6 HTTP Support
Enables or disables HTTP boot support for IPv6. This item is configurable only when
Network Stack
is
enabled.
&
PXE boot wait time
Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is
configurable only when
Network Stack
is enabled. (Default: 0)
&
Media detect count
Allows you to set the number of times to check the presence of media. This item is configurable only when
Network Stack
is enabled. (Default: 1)
±
NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
±
SATA And RST Configuration
&
SATA Controller(s)
Enables or disables the integrated SATA controllers. (Default: Enabled)
&
SATA Mode Selection
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
±
Intel RST Premium With Intel Optane System Acceleration
Enables RAID for the SATA controller.
±
AHCI
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
&
Aggressive LPM Support
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATA controllers. (Default: Disabled)
&
Port 0/1/2/3/4/5
Enables or disables each SATA port. (Default: Enabled)
&
Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
&
Configured as eSATA
Enables or disables support for external SATA devices.
±
EZ RAID
Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions
on configuring a RAID array.
±
Intel(R) Ethernet Connection
This sub-menu provides information on LAN configuration and related configuration options.
±
Miscellaneous
&
LEDs in System Power On State
Allows you to enable or disable motherboard LED lighting when the system is on.
±
Off
Disables the selected lighting mode when the system is on.
±
On
Enables the selected lighting mode when the system is on. (Default)
- 33 -