Gigabyte H470M H User Manual - Page 17

3/4) CPU_FAN/SYS_FAN (Fan Headers) All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The speed control function requires the use of a fan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be installed inside the chassis. 1 CPU_FAN 1 SYS_FAN Connector Maximum Current Maximum Power Pin No. 1 2 3 4 Definition GND Voltage Speed Control Sense PWM Speed Control CPU_FAN 2A 24W SYS_FAN 2A 24W •• Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating. Overheating may result in damage to the CPU or the system may hang. •• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers. 5) LED_C (RGB LED Strip Header) The header can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power rating of 2A (12V) and maximum lengthDPOEoBRf UT2Gm. Pin No. Definition 1 1 12V 2G 3R 4B Connect your RGB LED strip to the header. The power pin (marked with a RGB LED Strip triangle on the plug) of the LED strip must be connected to Pin 1 (12V) of 1 this header. Incorrect connection may lead to the damage of the LED strip. 12V For how to turn on/off the lights of the LED strip, please navigate to the "Unique Features" page of GIGABYTE's website. Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. - 17 -