Gigabyte H470M H User Manual - Page 8

Storage Interface ŠŠ ŠŠ ŠŠ USB ŠŠ Internal ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Back Panel ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Chipset: - 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 3.0 x4/x2 SSD support) - 4 x SATA 6Gb/s connectors Support for RAID 0, RAID 1, RAID 5, and RAID 10 Intel® Optane™ Memory Ready Chipset: - 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header) - 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header) 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x CPU fan header 1 x system fan header 1 x RGB LED strip header 1 x M.2 Socket 3 connector 4 x SATA 6Gb/s connectors 1 x front panel header 1 x front panel audio header 1 x USB 3.2 Gen 1 header 1 x USB 2.0/1.1 header 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) 1 x serial port header 1 x Clear CMOS jumper 1 x PS/2 keyboard/mouse port 1 x D-Sub port 1 x HDMI port j 2 x USB 3.2 Gen 1 ports 4 x USB 2.0/1.1 ports 1 x RJ-45 port 3 x audio jacks I/O Controller ŠŠ iTE® I/O Controller Chip Hardware Monitor BIOS ŠŠ Voltage detection ŠŠ Temperature detection ŠŠ Fan speed detection ŠŠ Fan fail warning ŠŠ Fan speed control * Whether the fan speed control function is supported will depend on the cooler you install. ŠŠ 1 x 128 Mbit flash ŠŠ Use of licensed AMI UEFI BIOS ŠŠ PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 j Only for H470M H. - 8 -