Gigabyte MD60-SC0 Manual - Page 20
prevent an electrical short inside the cable connector.
View all Gigabyte MD60-SC0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Speed LED Link Activity LED 10/100/1000 LAN Port Speed LED: State Yellow On Green On Off Description 1 Gbps data rate 100 Mbps data rate 10 Mbps data rate Link/Activity LED: State On Description Link between system and network or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring Speed LED Link/ Activity LED QSFP Speed LED: State Green On Yellow On Description 40 Gbps data rate 10 Gbps data rate QSFP LAN Port 10G/40G LAN Port (With Intel XL710 LAN Chipset) Link/Activity LED: State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring Port 1 Link/ Activity LED Port 0 Link/ Activity LED QSFP LAN Port 1000/10G LAN Port (With Intel 82599ES LAN Chipset) Link/Activity LED: State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring • When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. • When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. Hardware Installation - 20 -