Gigabyte MD60-SC0 Manual - Page 92
Alternate Device ID on RAID, sSATA Port 0/1/2/3, Port 0/1/2/3, Hot Plug for Port 0/1/2/3, Spin Up
View all Gigabyte MD60-SC0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Alternate Device ID on RAID Enable /Disable Alternate Device ID on RAID mode. Options available: Enabled/Disabled. Default setting is Disabled. Please note that this option appears when HDD is in RAID Mode. sSATA Port 0/1/2/3 The category identifies sSATA type of hard disk that are installed in the computer. System will automatically detect HDD type. Port 0/1/2/3 Enable/Disable Port 0/1/2/3 device. Options available: Enabled/Disabled. Default setting is Enabled. Hot Plug (for Port 0/1/2/3)(Note) Enable/Disable HDD Hot-Plug function. Options available: Enabled/Disabled. Default setting is Disabled. Configured as eSATA(Note) Display Hot-Plug supported information. Spin Up Device (for Port 0/1/2/3)(Note) On an edge detect from 0 to 1, the PCH starts a COM reset initialization to the device. Options available: Enabled/Disabled. Default setting is Disabled. sSATA Device Type Select sSATA device type. Options available: Hard Disk Drive/Solid State Drive. Default setting is Hard Disk Drive. (Note) Only Supported When HDD is in AHCI or RAID Mode. BIOS Setup - 92 -